CN3HM4E06

Polygard^® CN Cartridge Filter

pore size 30.0 μm, cartridge nominal length 4 in. (10 cm), Code M (2-118; O-rings)

• 동의어(들): Polygard-CN Cartridge Filter 4 in. 30.0 μm Code M Ethylene-Propylene
• UNSPSC 코드: 23151806
• eCl@ss: 32031690

속성

• material: EPR seal; polypropylene ; polypropylene support
• Quality Level: 400
• 특징: hydrophilic
• 제조업체/상표: Polygard
• 파라미터: 4.8 bar max. differential pressure (70 psid) at 25 °C; 4.8 bar max. inlet pressure (70 psi) at 25 °C
• 카트리지 공칭 길이: 4 in. (10 cm)
• 직경: 7.0 cm (2.75 in.)
• 여과 면적: 0.18 m²
• 불순물: ≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
• 공극 크기: 30.0 μm nominal pore size; 30.0 μm pore size
• 입력: sample type liquid
• 카트리지 코드: Code M (2-118; O-rings)

설명

일반 설명

The Polygard^® CN Cartridge Filter products are nominally rated filters designed for particle removal applications in liquids and gases. The pleated structure of Polygard^®-CN filter media minimizes pressure differentials during the filtration process, a 30.0 μm pore size and the all-polypropylene construction of these filters conveys low levels of extractables and broad chemical compatibility. Downstream filter performance is enhanced due to efficient particle and microorganism reduction.

Polygard-CN cartridge filters provide high throughput with 4.8 bar max. differential pressure (70 psid) at 25 °C Cartridges are robust, strong, resilient and are designed to withstand multiple steam-in-place cycles.

Typical Applications
Polygard-CN cartridge filters are widely used in the beverage industry for liquid and gas filtration applications, for fining operations and bioburden reduction.

Regulatory Compliance
Polygard^® CN Cartridge Filters are designed, developed, and manufactured in accordance with a Quality Management System approved by an accredited registering body to an ISO 9000 Quality Systems Standard and are shipped with a Certificate of Quality. Each cartridge filter is supported by a Validation Guide for compliance with regulatory requirements.

For traceability and easy identification, each cartridge filter is marked with identifying characteristics.

Multiple Formats Available
A full range of Polygard^® CN Cartridge Filter sizes is available to suit your application requirements. A variety of connection options are offered for easy adaptation to existing housings.

규격

Filter Grade: AP20

제조 메모

Sanitization Protocol
30 min with hot water @ 80 °C

Sterilization Method
10 autoclave cycles or SIP @ 126 °C for 30 min

기타 정보

Directions for Use

• Organism Retention: Microorganism reduction
• Mode of Action: Filtration (nominal)
• Application: BioProcessing
• Intended Use: Efficient particle and microorganism reduction
• Instructions for Use: Please refer to the Polygard^® and CLARIGARD^® Cartridges user guide
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

법적 정보

CLARIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany

POLYGARD is a registered trademark of Merck KGaA, Darmstadt, Germany