CMP273TS1

Milligard^® PES 1.2/0.2 µm nominal, Cartridge

pore size 1.2/0.2 μm, cartridge nominal length 30 in. (75 cm)

• 동의어(들): Milligard PES 30" 1.2/0.2 μm nominal Cartridge
• UNSPSC 코드: 23151806
• eCl@ss: 32031690

속성

• material: polyethersulfone membrane; polypropylene housing; polypropylene support; polypropylene vent cap
• Quality Level: 400
• 규정 준수: meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
• 무균: non-sterile
• 멸균 적합성: autoclavable compatible; steam-in-place compatible
• 제품 라인: EMPROVE^® Filter; Milligard^®
• 특징: hydrophilic
• 제조업체/상표: Milligard^®
• 파라미터: 1.38 bar max. differential pressure (20 psid) at 25 °C (Reverse); 5.52 bar max. differential pressure (80 psid) at 4-25 °C (Forward)
• 기술: bioburden reduction: suitable
• 길이: 31.8 in.
• 너비: 2.7 in.
• 카트리지 공칭 길이: 30 in. (75 cm)
• 직경: 69 mm (2.71 in.)
• 여과 면적: 1.8 m²
• 불순물: <0.25 EU/mL bacterial endotoxins (LAL test, per device; aqueous extraction; meeting requirements of USP <85>, EP 2.6.14 and JP 4.01)
• Matrix: Milligard^® PES
• pore size: 1.2/0.2 μm nominal pore size; 1.2/0.2 μm pore size
• 입력: sample type liquid
• 카트리지 코드: Code 7

설명

일반 설명

Device Configuration: Cartridge

기타 정보

The product is manufactured in a facility which adheres to Good Manufacturing Practices. The manufacturing facility’s Quality Management System is approved by an accredited registering body to the appropriate ISO 9001 Quality Standard.

Directions for Use

• Organism Retention: Microorganism
• Mode of Action: Filtration (size exclusion)
• Application: BioProcessing
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer wetting instructions of Filters with MILLIGARD^® PES Membrane user guide
• Storage Statement: Please refer Filters with MILLIGARD^® PES Membrane user guide
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

제조 메모

Sterilization Method
Autoclave wet 25x, 60 minute cycles at 128°C. In-line steam (wet): 10 forward cycles, 30 min.,
135 °C at ≤0.34 bar (5 psid) and 5 reverse cycles,
30 min., 135 °C at ≤0.07 bar (<1 psid)*.
*Devices were validated using steam at full differential pressure starting at 31 psid to a final differential pressure of 1 psid, resulting in a calculated average of 4 psid in forward and reverse directions.

This product was manufactured with materials that meet the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).

법적 정보

Emprove is a registered trademark of Merck KGaA, Darmstadt, Germany

MILLIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany