CGW171S48

Polysep^™ II 1.0/0.2/0.1 µm nominal, Cartridge

pore size 1.0/0.2/0.1 μm, cartridge nominal length 25 cm (10 in.)

• UNSPSC 코드: 23151806

속성

• material: borosilicate glass fiber (BGF) membrane; fluoroelastomer O-ring; mixed cellulose esters (MCE) membrane; polypropylene support
• Quality Level: 400
• 규정 준수: meets FDA 21 CFR 177-182 (all component materials)
• 무균: non-sterile
• 멸균 적합성: autoclavable compatible; steam-in-place compatible
• 제품 라인: Polysep^™
• 특징: hydrophilic
• 제조업체/상표: Polysep^™
• 기술: prefiltration: suitable
• 길이: 10 in.
• 너비: 2.7 in.
• 카트리지 공칭 길이: 25 cm (10 in.)
• 여과 면적: 0.42 m²
• 기질: Polysep^™ II
• pore size: 1.0/0.2/0.1 μm nominal pore size; 1.0/0.2/0.1 μm pore size
• 카트리지 코드: Code 7

설명

일반 설명

Device Configuration: Cartridge

특징 및 장점

Triple Layer

제조 메모

Non-Fiber Releasing: This product was manufactured with a media combination which meets the criteria for a "non-fiber releasing" filter as defined in 21CFR210.3(b)(6).

분석 메모

Gravimetric Extractables: the extractables level was equal to or less than 140 mg per 10-inch cartridge after 24 hours in water at controlled room temperature.

기타 정보

Directions for Use

• Organism Retention: Microorganism
• Mode of Action: Filtration (size exclusion)
• Application: BioProcessing
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer first page of Visual Inspection Guide and introduction section of Mixed cellulose esters Tech Brief
• Storage Statement: Please refer Mixed cellulose esters Tech Brief
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

법적 정보

Polysep is a trademark of Sigma-Aldrich Co. LLC