콘텐츠로 건너뛰기
Merck
모든 사진(1)

주요 문서

1.50316

Supelco

LiChrospher® Si 100 (5 µm) HPLC Columns

L x I.D. 250 mm x 4 mm Hibar® RT HPLC Column

동의어(들):

TM=["LiChrospher"] Si HPLC column

로그인조직 및 계약 가격 보기


About This Item

UNSPSC 코드:
41115709
NACRES:
SB.52
가격 및 재고 정보를 현재 이용할 수 없음 고객지원팀으로 연락바랍니다.

제품명

LiChrospher® Si 100 (5 µm) Hibar® RT 250-4, suitable for HPLC

material

stainless steel column

Quality Level

Agency

suitable for USP L3

제품 라인

LiChrospher®

특징

endcapped: no

파라미터

400 bar pressure
60 °C max. temp.

기술

HPLC: suitable
mass spectrometry (MS): suitable (Low - Medium)

컬럼 길이 × I.D.

25 cm × 4 mm

표면적

350 m2/g

Matrix

fully porous particle

기질 활성군

Silica bonding phase

입자 크기

5 μm

공극 크기

100 Å pore size

작동 pH 범위

2-7.5

분리 기술

hydrophilic interaction (HILIC)
normal phase
supercritical fluid (SFC)

저장 온도

no temp limit

일반 설명

HPLC column
Superspher® Si 60 is a versatile HPLC spherical silica sorbent with a particle size of 4µm and a pore diameter of 60A for normal phase chromatography. This sorbent is packed into a Hibar 250-4 HPLC column. For mounting of a LiChroCART 4-4 guard column, the guard column holder 1.51487 has to be used.

분석 메모

Pressure: ≤ 80 bar
Theoretical Plates (N/m) (2-Nitrotoluene): ≥ 55000
Symmetry (2-Nitrotoluene): 0.8 - 1.4
Capacity factor (2-Nitrotoluene): 0.5 - 2.0

법적 정보

Hibar is a registered trademark of Merck KGaA, Darmstadt, Germany
LiChrospher is a registered trademark of Merck KGaA, Darmstadt, Germany
Superspher is a registered trademark of Merck KGaA, Darmstadt, Germany

시험 성적서(COA)

제품의 로트/배치 번호를 입력하여 시험 성적서(COA)을 검색하십시오. 로트 및 배치 번호는 제품 라벨에 있는 ‘로트’ 또는 ‘배치’라는 용어 뒤에서 찾을 수 있습니다.

이 제품을 이미 가지고 계십니까?

문서 라이브러리에서 최근에 구매한 제품에 대한 문서를 찾아보세요.

문서 라이브러리 방문

질문

  1. What type of mobile phase is used with the LiChrospher Si for the analysis of water-insoluble oils?

    1 답변
    1. The LiChrospher Si 100 (5um) Hibar TS 250-4 HPLC column is suitable for use in normal phase and HILIC modes, as well as SFC. For water-insoluble compounds that are organic solvent soluble, normal phase mode is the mode of choice. The mobile phase for normal phase mode includes n-hexane, n-heptane, dichloromethane, and dichloroethane, with small amounts of diethyl ether, methyl acetate, ethyl acetate, acetone, isopropanol, ethanol, or methanol as modifiers to shorten retention time. An example is 95% hexane/5% ethyl acetate. The combination of solvents used depends on the analytes of interest.

      도움이 되었습니까?

후기

평점 값 없음

활성 필터

자사의 과학자팀은 생명 과학, 재료 과학, 화학 합성, 크로마토그래피, 분석 및 기타 많은 영역을 포함한 모든 과학 분야에 경험이 있습니다..

고객지원팀으로 연락바랍니다.