추천 제품
설명
Sintering temperature: 150-250 °C for 10 – 60 min
Solid content: 40%
Volume Resistivity: 5 – 30 uΩ.cm
형태
liquid
표면장력
28-31 dyn/cm
점도
11-13 cP (Brookfield)
저장 온도
2-8°C
유사한 제품을 찾으십니까? 방문 제품 비교 안내
일반 설명
SunTronic EMD5730 is formulated for inkjet printing of conductive traces onto a variety of substrates. EMD5730 is a solvent-based silver nanoparticle ink which demonstrates superior conductivity, stable jetting performance and adhesion to ITO coated glass.
EMD5730 can be used in the manufacture of touch panel displays, printed RFID antennae, smart cards, sensors, security labels, touch switches and other printed electronics applications.
EMD5730 can be used in the manufacture of touch panel displays, printed RFID antennae, smart cards, sensors, security labels, touch switches and other printed electronics applications.
애플리케이션
SunTronic® silver nanoparticle ink for inkjet printing (SunTronic® EMD5730) is a 3D additive printing technology that is used in a variety of applications such as flexible microsystems, and electronics. It is printed on a liquid crystal polymeric substrate for the formation of a low cost, adaptable tooling for effective deposition of a wide range of materials.
주의사항
Printing
EMD5730 is supplied as ready-to-use solvent based inks, and can be printed on various deposition printers and jetted on through various piezo DOD inkjet printheads suitable for solvent based inks, although full printhead compatibility will need to be verified in each case.
EMD5730 is supplied as ready-to-use solvent based inks, and can be printed on various deposition printers and jetted on through various piezo DOD inkjet printheads suitable for solvent based inks, although full printhead compatibility will need to be verified in each case.
Sintering:
Sintering conditions may change for different ink film thicknesses. Typical sintering temperature may range from 150-250°C depending on temperature tolerance of the substrate. Sintering time may range from 10-30 minutes. Electrical Resistance may be reduced with higher sintering temperature and/or longer sintering times.
Sintering conditions may change for different ink film thicknesses. Typical sintering temperature may range from 150-250°C depending on temperature tolerance of the substrate. Sintering time may range from 10-30 minutes. Electrical Resistance may be reduced with higher sintering temperature and/or longer sintering times.
Storage at a cool room temperature 10-15°C is recommended. Refrigeration can be used but agitated to assure proper dispersion is recommended.
법적 정보
SunTronic is a registered trademark of Sun Chemical, Inc.
신호어
Danger
유해 및 위험 성명서
Hazard Classifications
Acute Tox. 4 Oral - Aquatic Acute 1 - Aquatic Chronic 1 - Eye Irrit. 2 - Flam. Liq. 2 - STOT RE 2 Oral
표적 기관
Kidney
Storage Class Code
3 - Flammable liquids
WGK
WGK 3
Flash Point (°F)
71.6 °F
Flash Point (°C)
22 °C
시험 성적서(COA)
제품의 로트/배치 번호를 입력하여 시험 성적서(COA)을 검색하십시오. 로트 및 배치 번호는 제품 라벨에 있는 ‘로트’ 또는 ‘배치’라는 용어 뒤에서 찾을 수 있습니다.
이미 열람한 고객
Study of inkjet-printed serpentine structure on flexible substrates deformed over sculptured surfaces
Bower IA, et al.
Flexible and Printed Electronics (2020)
Low-Temperature Assembly of Surface-Mount Device on Flexible Substrate Using Additive Printing Process
2018 IEEE 68th Electronic Components and Technology Conference, 379-385 (2018)
Additively Manufactured mm-Wave Multichip Modules With Fully Printed``Smart''Encapsulation Structures
He X, et al.
IEEE Transactions on Components, Hybrids, and Manufacturing (2019)
문서
Professors Tokito and Takeda share design principles and optimization protocols for organic electronic devices, focusing on flexibility and low cost.
자사의 과학자팀은 생명 과학, 재료 과학, 화학 합성, 크로마토그래피, 분석 및 기타 많은 영역을 포함한 모든 과학 분야에 경험이 있습니다..
고객지원팀으로 연락바랍니다.