This platinum paste has initially been developed as a screen printing paste to obtain a highly conductive and “catalytic” amount of platinum when printed on a transparent substrate (glass, plastics), while allowing the substrates to maintain their transparency after deposition and annealing. The concentration of platinum is therefore quite low (<1%), and the screen printed layer is usually quite thin. Any changes to the product would be for the researcher to experiment with. This paste must be fired at or above 420°C and any modifications made to the product does void the performance guarantee.
추천 제품
양식
paste (Amber)
Quality Level
점도
2500-4500 mPa.s (Analysis carried out at 20°C with 20mm 4 degree cone/plate; 40 s-1)
저장 온도
2-8°C
SMILES string
[Pt]
InChI
1S/Pt
InChI key
BASFCYQUMIYNBI-UHFFFAOYSA-N
애플리케이션
PT1 Platinum Paste can be used in applications that require a highly transparent layer with high electrocatalytic activity.
PT1 Platinum Paste is oil-based and formulated to be applied using a screen printer; providing films with excellent uniformity; performance and reproducibility; and can be used for DSSC polot production.
After drying; this paste must be fired at or above 420°C. This results in uniformly distributed platinum nanoclusters; providing good transparency and high catalytic activity for the electrochemical reduction of I3- to I-.
Suggested Mesh Screen: 100T
PT1 Platinum Paste is oil-based and formulated to be applied using a screen printer; providing films with excellent uniformity; performance and reproducibility; and can be used for DSSC polot production.
After drying; this paste must be fired at or above 420°C. This results in uniformly distributed platinum nanoclusters; providing good transparency and high catalytic activity for the electrochemical reduction of I3- to I-.
Suggested Mesh Screen: 100T
법적 정보
Product of Greatcell Solar Materials Pty Ltd.
Greatcell Solar is a registered trademark of Greatcell Solar Materials Pty Ltd
Greatcell Solar is a registered trademark of Greatcell Solar Materials Pty Ltd
신호어
Danger
유해 및 위험 성명서
Hazard Classifications
Eye Dam. 1 - Resp. Sens. 1 - Skin Irrit. 2 - Skin Sens. 1
Storage Class Code
10 - Combustible liquids
WGK
WGK 1
Flash Point (°F)
194.0 °F
Flash Point (°C)
90 °C
이미 열람한 고객
문서
Dye-sensitized solar cells (DSCs) are 3rd generation solar cells combining the promise of high efficiency with low production costs.
While dye sensitization as the basis for color photography has been accepted for a very long time,1 attempts to use this principle for the conversion of solar light to electricity generally had resulted only in very low photocurrents, below 100 nA/cm
Professors Tokito and Takeda share design principles and optimization protocols for organic electronic devices, focusing on flexibility and low cost.
Progress in solution-processed functional materials leads to thin-film optoelectronic devices for industrial and consumer electronics.
-
Can the paste be thinned using solvent? If so, which? Also, will be paste become solid if cured underneath the 420degC temperature? And would it adhere to a polymer substrate? Thanks!
1 답변-
도움이 되었습니까?
-
-
Does it work as a conductive paste? Do you have the resistivity of the paste?
1 답변-
Unfortunately, Product 791512 has not been tested for its properties in terms of conductivity or resistivity. Rather, it was developed for its catalytic properties.
도움이 되었습니까?
-
활성 필터
자사의 과학자팀은 생명 과학, 재료 과학, 화학 합성, 크로마토그래피, 분석 및 기타 많은 영역을 포함한 모든 과학 분야에 경험이 있습니다..
고객지원팀으로 연락바랍니다.
