コンテンツへスキップ
Merck

A hybrid dielectrophoretic system for trapping of microorganisms from water.

Biomicrofluidics (2015-07-17)
Narjes Allahrabbi, Yi Shi Michelle Chia, Mohammad S M Saifullah, Kian-Meng Lim, Lin Yue Lanry Yung
要旨

Assessment of the microbial safety of water resources is among the most critical issues in global water safety. As the current detection methods have limitations such as high cost and long process time, new detection techniques have transpired among which microfluidics is the most attractive alternative. Here, we show a novel hybrid dielectrophoretic (DEP) system to separate and detect two common waterborne pathogens, Escherichia coli (E. coli), a bacterium, and Cryptosporidium parvum (C. parvum), a protozoan parasite, from water. The hybrid DEP system integrates a chemical surface coating with a microfluidic device containing inter-digitated microelectrodes to impart positive dielectrophoresis for enhanced trapping of the cells. Trimethoxy(3,3,3-trifluoropropyl) silane, (3-aminopropyl)triethoxysilane, and polydiallyl dimethyl ammonium chloride (p-DADMAC) were used as surface coatings. Static cell adhesion tests showed that among these coatings, the p-DADMAC-coated glass surface provided the most effective cell adhesion for both the pathogens. This was attributed to the positively charged p-DADMAC-coated surface interacting electrostatically with the negatively charged cells suspended in water leading to increased cell trapping efficiency. The trapping efficiency of E. coli and C. parvum increased from 29.0% and 61.3% in an uncoated DEP system to 51.9% and 82.2% in the hybrid DEP system, respectively. The hybrid system improved the cell trapping by encouraging the formation of cell pearl-chaining. The increment in trapping efficiency in the hybrid DEP system was achieved at an optimal frequency of 1 MHz and voltage of 2.5 Vpp for C. parvum and 2 Vpp for E. coli, the latter is lower than 2.5 Vpp and 7 Vpp, respectively, utilized for obtaining similar efficiency in an uncoated DEP system.

材料
製品番号
ブランド
製品内容

Sigma-Aldrich
(3-アミノプロピル)トリエトキシシラン, 99%
Sigma-Aldrich
塩酸 溶液, 1.0 N, BioReagent, suitable for cell culture
Sigma-Aldrich
塩酸, 36.5-38.0%, BioReagent, for molecular biology
Supelco
塩酸 溶液, volumetric, 0.1 M HCl (0.1N), endotoxin free
Sigma-Aldrich
塩酸, SAJ first grade, 35.0-37.0%
Sigma-Aldrich
(3-アミノプロピル)トリエトキシシラン, ≥98.0%
Sigma-Aldrich
塩酸 溶液, 1 M
Sigma-Aldrich
塩酸, JIS special grade, 35.0-37.0%
Sigma-Aldrich
塩酸 溶液, ~6 M in H2O, for amino acid analysis
Sigma-Aldrich
塩酸 溶液, 0.1 M
Sigma-Aldrich
塩酸 溶液, 6 M
Sigma-Aldrich
塩酸 溶液, 12 M
Sigma-Aldrich
塩化水素 溶液, 3 M in cyclopentyl methyl ether (CPME)
Sigma-Aldrich
オクタメチルトリシロキサン, viscosity 1.0 cSt (25 °C)
Sigma-Aldrich
塩酸 溶液, 2 M
Sigma-Aldrich
塩酸 溶液, 0.5 M
Sigma-Aldrich
ポリ(ジメチルシロキサン), viscosity 0.65 cSt (25 °C)
Sigma-Aldrich
(3-アミノプロピル)トリエトキシシラン, packaged for use in deposition systems, ≥98%
Sigma-Aldrich
塩酸 溶液, 0.2 M
Sigma-Aldrich
(3-アミノプロピル)トリエトキシシラン, ≥98%
Sigma-Aldrich
塩酸 溶液, 0.01 M
Sigma-Aldrich
塩酸 溶液, 0.05 M
Sigma-Aldrich
塩酸 溶液, 0.02 M
Sigma-Aldrich
塩酸, SAJ super special grade, ≥35.0%
Sigma-Aldrich
塩酸, suitable for determination of toxic metals, ≥35.0%
Sigma-Aldrich
塩化水素-エタノール 溶液, 3% in ethanol
Sigma-Aldrich
塩化水素-エタノール 溶液, 0.1 M in ethanol
Sigma-Aldrich
塩酸, suitable for arsenic determination, 35.0-37.0%
Sigma-Aldrich
塩酸 溶液, SAJ first grade, 9.5-10.0%