81392
Poly(vinyl chloride)
Selectophore™, high molecular weight
Sinonimo/i:
PVC
Autenticatiper visualizzare i prezzi riservati alla tua organizzazione & contrattuali
About This Item
Formula condensata:
(CH2CHCl)n
Numero CAS:
Numero MDL:
Codice UNSPSC:
26111700
ID PubChem:
NACRES:
NB.61
Prodotti consigliati
Grado
for ion-selective electrodes
Livello qualitativo
Nome Commerciale
Selectophore™
Forma fisica
powder
Viscosità
2.0-5.0 mPa.s, 3 % in THF(25 °C)
Densità
1.4 g/mL at 25 °C (lit.)
Stringa SMILE
ClC=C
InChI
1S/C2H3Cl/c1-2-3/h2H,1H2
BZHJMEDXRYGGRV-UHFFFAOYSA-N
Cerchi prodotti simili? Visita Guida al confronto tra prodotti
Categorie correlate
Descrizione generale
Poly(vinyl chloride), popular as PVC, is a polymer which is prepared from vinyl chloride monomer via polymerisation. It can never be used as such and is mostly mixed with heat stabilizers, lubricants, plasticizers, fillers, and other additives. Due to its high chemical resistance property it finds wide application in construction and lining of chemical plants.
Visit our Sensor Applications portal to learn more.
Applicazioni
It has been used to fabricate Aluminum(III) selective potentiometric sensor from PVC matrix membrane which has morin ionophore.
Note legali
Selectophore is a trademark of Merck KGaA, Darmstadt, Germany
Codice della classe di stoccaggio
11 - Combustible Solids
Classe di pericolosità dell'acqua (WGK)
WGK 3
Punto d’infiammabilità (°F)
Not applicable
Punto d’infiammabilità (°C)
Not applicable
Dispositivi di protezione individuale
dust mask type N95 (US), Eyeshields, Gloves
Choose from one of the most recent versions:
Possiedi già questo prodotto?
I documenti relativi ai prodotti acquistati recentemente sono disponibili nell’Archivio dei documenti.
I clienti hanno visto anche
Poly (vinyl chloride).
Allsopp, Michael W., and Giovanni Vianello.
Ullmann's Encyclopedia of Industrial Chemistry (1992)
Aluminum (III) selective potentiometric sensor based on morin in poly (vinyl chloride) matrix.
Gupta, Vinod K., Ajay K. Jain, and Gaurav Maheshwari.
Talanta, 72.4, 1469-1473 (2007)
T D Ambrisko et al.
British journal of anaesthesia, 110(2), 305-310 (2012-11-21)
In a previous study, the authors found a large bias (50%) for lithium (LiDCO) compared with thermodilution cardiac output measurement methods in ponies receiving i.v. infusions of xylazine, ketamine, and midazolam. This prompted the authors to examine the effect of
Christopher B Stipe et al.
Applied spectroscopy, 66(11), 1286-1293 (2012-11-14)
Airborne silica dust (quartz) is common in coal mines and represents a respiratory hazard that can lead to silicosis, a potentially fatal lung disease. With an eye toward developing a portable monitoring device for rapid analysis of silica dust, laser-induced
Tariq Hussain et al.
International journal of pharmaceutics, 441(1-2), 781-789 (2012-10-16)
Electrostatic charge is generated during powder handling due to particle-particle and particle-wall collisions, rubbing, sliding, and rolling. In case of bipolar charge generation, the electrostatic forces may significantly change the inner forces and increase powder adhesion and cause a serious
Il team dei nostri ricercatori vanta grande esperienza in tutte le aree della ricerca quali Life Science, scienza dei materiali, sintesi chimica, cromatografia, discipline analitiche, ecc..
Contatta l'Assistenza Tecnica.