CVSC02TP3

Multimedia Durapore^® 1.2/0.5/0.22 µm, Cartridge

cartridge nominal length 20 in. (50 cm), filter diam. 2.7 in. (6.9 cm), Code 0

• Codice UNSPSC: 23151806

Proprietà

• Materiali: mixed cellulose esters (MCE) prefilter; polypropylene device; polypropylene support; silicone seal
• Livello qualitativo: 400
• Conformità normativa: meets FDA 21 CFR 177-182 (all component materials)
• Sterilità: non-sterile
• Compatibilità con la sterilizzazione: autoclavable compatible; steam-in-place compatible
• Nome Commerciale: Durapore^®
• Caratteristiche: hydrophilic
• Produttore/marchio commerciale: Durapore^®
• Parametri: ≤21.6 mL/min air diffusion at 2.75 bar (40 psig) (in water); 0.35 bar max. differential pressure (5 psid) at 135 °C (forward); 0.35 bar max. inlet pressure (5 psi) at 135 °C (forward); 1.7 bar max. differential pressure (25 psid) at 80 °C (forward); 1.7 bar max. inlet pressure (25 psi) at 80 °C (forward); 3.5 bar max. differential pressure (50 psid) at 25 °C (reverse; intermittent); 3.5 bar max. inlet temp. (50 psi) at 25 °C (reverse; intermittent); 5.5 bar max. differential pressure (80 psid) at 25 °C (forward); 5.5 bar max. inlet pressure (80 psi) at 25 °C (forward)
• tecniche: sterile filtration: suitable
• Lunghezza: 20 in.
• Larghezza: 2.7 in.
• Lunghezza nominale della cartuccia: 20 in. (50 cm)
• device size: 20 in.
• Diam. filtro: 2.7 in. (6.9 cm)
• Superficie filtrante: 1.12 m²
• Impurezze: ≤0.5 EU/mL bacterial endotoxins (LAL test, aqueous extraction); <0.5 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
• Estraibili (gravimetria): ≤70 mg/cartridge
• Matrice: Multimedia Durapore^®
• pore size: 1.2/0.5/0.22 μm pore size
• Punto di bolla: ≥3450 mbar (50 psig), air with water
• Codice: Code 0

Descrizione

Descrizione generale

Device configuration: Cartridge
Cartridge type: Liquid

Confezionamento

Double Easy-Open bag

Nota sulla preparazione

Sterilization Method: 6 autoclave or SIP cycles of 30 min at 123°C

This product was manufactured with a Durapore^®  membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).

Risultati analitici

Bacterial Retention: Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm²  using ASTM^® F838 methodology.

Gravimetric Extractables: The extractables level was ≤ 70 mg per 10-inch cartridge after 24 hours in water at controlled room temperature.
Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥ 10 L

Altre note

Directions for Use:

• Organism Retention: Microorganism
• Mode of Action: Filtration (size exclusion)
• Application: BioProcessing
• Intended use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer to Wetting Instructions for Filter Units with Durapore^® Membrane user guide
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations

Note legali

ASTM is a registered trademark of American Society for Testing and Materials

Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany