CGW903SB1

Filtro per cartuccia Bevigard^™-P

pore size 2.0/1.2 μm, cartridge nominal length 30 in. (75 cm), Code 0 (2-222; O-rings)

• Sinonimo/i: Bevigard^™-P Cartridge Filter 30 in. 1.2 μm Code 0
• Codice UNSPSC: 23151806
• eCl@ss: 32031610

Proprietà

• Materiali: borosilicate glass fiber (BGF) prefilter; mixed cellulose esters (MCE) ; polypropylene ; polypropylene support (Spun bonded); silicone seal
• Conformità normativa: meets EU framework regulation [1935/2004/EC] (all component materials; regarding materials and articles intended to contact food); meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
• Produttore/marchio commerciale: Bevigard^™
• Parametri: 3.5 bar max. differential pressure (50 psid) at 25 °C
• Lunghezza nominale della cartuccia: 30 in. (75 cm)
• Diametro: 7.1 cm (2.8 in.)
• Superficie filtrante: 1.38 m²
• Impurezze: ≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
• Estraibili (gravimetria): ≤420 mg/cartridge
• Matrice: Bevigard^™-P
• pore size: 2.0/1.2 μm pore size
• input: sample type beverage(s); sample type food(s); sample type wine; sample type bottled water; sample type liquid; sample type beer
• Codice cartuccia: Code 0 (2-222; O-rings)

Descrizione

Descrizione generale

Device Configuration: Cartridge

Caratteristiche e vantaggi

Format: Double Layer

Confezionamento

Double Easy-Open bag

Altre note

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Directions for Use:

• Organism Retention: Microorganism
• Mode of Action: Filtration (size exclusion)
• Application: BioProcessing
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer to installation and wetting sections of OptiScale^®-25 user guide and introduction section of Mixed celulose esters Tech Brief
• Storage Statement: Please refer Mixed cellulose esters Tech Brief
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Nota sulla preparazione

Sanitization Protocol
30 min with hot water @ 80 °C

Sterilization Method
10 autoclave cycles or SIP @ 121 °C for 30 min

This product was manufactured with a media combination which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).

Risultati analitici

Gravimetric Extractables: after 24 hours in water at controlled room temperature

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥15 L

Note legali

Bevigard is a trademark of Merck KGaA, Darmstadt, Germany

OptiScale is a registered trademark of Merck KGaA, Darmstadt, Germany

Informazioni sulla sicurezza

• Pittogrammi: GHS02,GHS08
• Avvertenze: Danger
• Indicazioni di pericolo: H228,H350i
• Consigli di prudenza: P202 - P210 - P240 - P241 - P280 - P308 + P313
• Classi di pericolo: Carc. 1B Inhalation - Flam. Sol. 1
• Codice della classe di stoccaggio: 4.1B - Flammable solid hazardous materials
• Classe di pericolosità dell'acqua (WGK): WGK 3