57173
ENVI-Disk™ Holder For 47mm ENVI-DSK Discs
for use with 47 mm ENVI-Disk disks
Sinónimos:
Soporte ENVI-Disk™
Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
About This Item
UNSPSC Code:
12000000
Productos recomendados
technique(s)
solid phase extraction (SPE): suitable
Quality Level
application(s)
food and beverages
compatibility
for use with 47 mm ENVI-Disk disks
General description
Use the ENVI-Disk Holder with 47 mm ENVI-DSK SPE disks.
The unique design of the holder allows each disk to be installed and held firmly in place without wrinkling and tearing. A screw clamp provides uniform pressure on the disk and the sealing surfaces to prevent troublesome leaks - spring-loaded clamps cannot offer the sealing integrity of the ENVI-Disk Holder.
The unit consists of a 1 L sample funnel, a threaded screw clamp, a PTFE disk support, and a PTFE filter base/adapter with a vacuum attachment fitting. The filter base fits onto any 1 L flask that has a 40/35 tapered ground glass neck. Use 25 x 250 mm test tubes to collect disk eluates.
To use the holder, place the base/adapter on the 1 L flask and center an ENVI-DSK on the disk support in the base. Loosen the screw clamp to install the funnel, then tighten to secure the unit. Attach the base/adapter to a vacuum source, and the unit is ready to use.
The unique design of the holder allows each disk to be installed and held firmly in place without wrinkling and tearing. A screw clamp provides uniform pressure on the disk and the sealing surfaces to prevent troublesome leaks - spring-loaded clamps cannot offer the sealing integrity of the ENVI-Disk Holder.
The unit consists of a 1 L sample funnel, a threaded screw clamp, a PTFE disk support, and a PTFE filter base/adapter with a vacuum attachment fitting. The filter base fits onto any 1 L flask that has a 40/35 tapered ground glass neck. Use 25 x 250 mm test tubes to collect disk eluates.
To use the holder, place the base/adapter on the 1 L flask and center an ENVI-DSK on the disk support in the base. Loosen the screw clamp to install the funnel, then tighten to secure the unit. Attach the base/adapter to a vacuum source, and the unit is ready to use.
Legal Information
ENVI-Disk is a trademark of Sigma-Aldrich Co. LLC
Elija entre una de las versiones más recientes:
Certificados de análisis (COA)
Lot/Batch Number
Lo sentimos, en este momento no disponemos de COAs para este producto en línea.
Si necesita más asistencia, póngase en contacto con Atención al cliente
¿Ya tiene este producto?
Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.
Los clientes también vieron
Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.
Póngase en contacto con el Servicio técnico