跳转至内容
Merck
  • Effects of Tailored Surface Chemistry on Desorption Electrospray Ionization Mass Spectrometry: a Surface-Analytical Study by XPS and AFM.

Effects of Tailored Surface Chemistry on Desorption Electrospray Ionization Mass Spectrometry: a Surface-Analytical Study by XPS and AFM.

Journal of the American Society for Mass Spectrometry (2015-04-22)
Andrea Penna, Maria Careri, Nicholas D Spencer, Antonella Rossi
摘要

Since it was proposed for the first time, desorption electrospray ionization-mass spectrometry (DESI-MS) has been evaluated for applicability in numerous areas. Elucidations of the ionization mechanisms and the subsequent formation of isolated gas-phase ions have been proposed so far. In this context, the role of both surface and pneumatic effects on ion-formation yield has recently been investigated. Nevertheless, the effect of the surface chemistry has not yet been completely understood. Functionalized glass surfaces have been prepared, in order to tailor surface performance for ion formation. Three substrates were functionalized by depositing three different silanes [3-mercaptopropyltriethoxysilane (MTES), octyltriethoxysilane (OTES), and 1H,1H,2H,2H-perfluorooctyltriethoxy-silane (FOTES)] from toluene solution onto standard glass slides. Surface characterization was carried out by contact-angle measurements, tapping-mode atomic force microscopy, and X-ray photoelectron spectroscopy. Morphologically homogeneous and thickness-controlled films in the nm range were obtained, with surface free energies lying between 15 and 70 mJ/m(2). These results are discussed, together with those of DESI-MS on low-molecular-weight compounds such as melamine, tetracycline, and lincomycin, also taking into account the effects of the sprayer potential and its correlation with surface wettability. The results demonstrate that ion-formation efficiency is affected by surface wettability, and this was demonstrated operating above and below the onset of the electrospray.

材料
货号
品牌
产品描述

Sigma-Aldrich
三聚氰胺, 99%
Sigma-Aldrich
甲醇, JIS special grade, ≥99.8%
Sigma-Aldrich
四环素, 98.0-102.0% (HPLC)
Sigma-Aldrich
四环素, 98.0-102.0% (HPLC)
Sigma-Aldrich
三乙氧基(辛基)硅烷, 97%
Sigma-Aldrich
3-巯丙基三乙氧基硅烷, ≥80% (GC), technical
Sigma-Aldrich
纯乙醇, 190 proof, ACS spectrophotometric grade, 95.0%
Sigma-Aldrich
乙腈, anhydrous, 99.8%
Sigma-Aldrich
甲醇, SAJ first grade, ≥99.5%
Sigma-Aldrich
甲苯, anhydrous, 99.8%
Sigma-Aldrich
甲醇, anhydrous, 99.8%
Sigma-Aldrich
纯乙醇, 200 proof, anhydrous, ≥99.5%
Supelco
10% (v/v) 乙醇标准品, 10 % (v/v) in H2O, analytical standard
Sigma-Aldrich
乙腈, electronic grade, 99.999% trace metals basis
Supelco
乙腈, HPLC grade, ≥99.93%
Sigma-Aldrich
甲苯, SAJ first grade, ≥99.0%
Sigma-Aldrich
甲醇, suitable for HPLC
Sigma-Aldrich
酒精, ≥99.5%, suitable for HPLC
Sigma-Aldrich
乙腈, ≥99.8%, suitable for HPLC
Sigma-Aldrich
甲醇, SAJ special grade
Sigma-Aldrich
酒精, JIS special grade, 94.8-95.8%
Sigma-Aldrich
酒精, ≥99.5%
Sigma-Aldrich
甲苯, JIS special grade, ≥99.5%
Sigma-Aldrich
甲醇, suitable for HPLC, gradient grade, 99.93%
Sigma-Aldrich
乙腈, ≥99.8%, for residue analysis, JIS 300
Sigma-Aldrich
甲醇, NMR reference standard
Sigma-Aldrich
纯乙醇, 190 proof, meets USP testing specifications
Sigma-Aldrich
酒精, ≥99.5%, suitable for absorption spectrum analysis
Supelco
甲苯, HPLC grade, 99.8%
Sigma-Aldrich
乙腈, JIS special grade, ≥99.5%