跳转至内容
Merck
  • Influence of different formulations and process parameters during the preparation of drug-loaded PLGA microspheres evaluated by multivariate data analysis.

Influence of different formulations and process parameters during the preparation of drug-loaded PLGA microspheres evaluated by multivariate data analysis.

Acta pharmaceutica (Zagreb, Croatia) (2014-12-23)
Jakub Vysloužil, Petr Doležel, Martina Kejdušová, Eliška Mašková, Josef Mašek, Robert Lukáč, Vratislav Košťál, David Vetchý, Kateřina Dvořáčková
摘要

The main objective of this study was to evaluate the influence of the formulation and process parameters on PLGA microparticles containing a practically insoluble model drug (ibuprofen) prepared by the o/w solvent evaporation method. Multivariate data analysis was used. The effects of altered stirring speed of a mechanical stirrer (600, 1000 rpm), emulsifier concentrations (PVA concentration 0.1 %, 1 %) and solvent selection (dichloromethane, ethyl acetate) on microparticle characteristics (encapsulation efficiency, drug loading, burst effect) were observed. It was found that with increased stirring speed, the PVA concentration or the use of ethyl acetate had a significantly negative effect on encapsulation efficiency. In addition, ethyl acetate had an adverse effect on the burst effect, while increased stirring speed had the opposite effect. Drug load was not affected by any particular variable, but rather by the interactions of evaluated variables.

材料
货号
品牌
产品描述

Sigma-Aldrich
二氯甲烷, suitable for HPLC, ≥99.8%, contains amylene as stabilizer
Sigma-Aldrich
磷酸钾 一元, ACS reagent, ≥99.0%
Sigma-Aldrich
二氯甲烷, contains 40-150 ppm amylene as stabilizer, ACS reagent, ≥99.5%
Sigma-Aldrich
磷酸钠 二元, ACS reagent, ≥99.0%
Sigma-Aldrich
二氯甲烷, HPLC Plus, for HPLC, GC, and residue analysis, ≥99.9%, contains 50-150 ppm amylene as stabilizer
Sigma-Aldrich
磷酸钠 二元, puriss. p.a., ACS reagent, anhydrous, ≥99.0% (T)
Sigma-Aldrich
磷酸钾 一元, powder, suitable for cell culture, suitable for insect cell culture, suitable for plant cell culture, ≥99.0%
Sigma-Aldrich
二氯甲烷, ACS reagent, ≥99.5%, contains 40-150 ppm amylene as stabilizer
Sigma-Aldrich
二氯甲烷, anhydrous, ≥99.8%, contains 40-150 ppm amylene as stabilizer
Sigma-Aldrich
磷酸钾 一元, buffer substance, anhydrous, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., 99.5-100.5%
Sigma-Aldrich
二氯甲烷, puriss. p.a., ACS reagent, reag. ISO, ≥99.9% (GC)
Sigma-Aldrich
磷酸钠 二元, puriss., meets analytical specification of Ph. Eur., BP, USP, FCC, E 339, anhydrous, 98-100.5% (calc. to the dried substance)
Sigma-Aldrich
布洛芬, ≥98% (GC)
Sigma-Aldrich
磷酸钾 一元, for molecular biology, ≥98.0%
Sigma-Aldrich
磷酸钾 一元, meets analytical specification of Ph. Eur., NF, E340, anhydrous, 98-100.5% (calc. to the dried substance)
Sigma-Aldrich
磷酸钠 二元, for molecular biology, ≥98.5% (titration)
Sigma-Aldrich
磷酸钠 二元, BioReagent, suitable for cell culture, suitable for insect cell culture, ≥99.0%
Sigma-Aldrich
磷酸氢二钠 溶液, BioUltra, 0.5 M in H2O
Sigma-Aldrich
二氯甲烷, puriss., meets analytical specification of Ph. Eur., NF, ≥99% (GC)
USP
布洛芬, United States Pharmacopeia (USP) Reference Standard
Sigma-Aldrich
二氯甲烷, ACS reagent, ≥99.5%, contains 40-150 ppm amylene as stabilizer
Sigma-Aldrich
磷酸钠 二元, 99.95% trace metals basis
Sigma-Aldrich
磷酸钠 二元, ReagentPlus®, ≥99.0%
Sigma-Aldrich
磷酸钾 一元, ReagentPlus®
Supelco
二氯甲烷, Pharmaceutical Secondary Standard; Certified Reference Material
Supelco
布洛芬, Pharmaceutical Secondary Standard; Certified Reference Material
Supelco
布洛芬
Sigma-Aldrich
磷酸钠 二元, BioUltra, for molecular biology, ≥99.5% (T)
Sigma-Aldrich
磷酸钾 一元, BioUltra, for molecular biology, anhydrous, ≥99.5% (T)
Supelco
磷酸根 IC 标准溶液, TraceCERT®, 1000 mg/L phosphate in water (nominal concentration)