PSGVAG021

Prostak^™ MF 模块 0.22 µm 2 stack 0.17 m ²

pore size 0.22 μm

• 别名: Prostak^™ MF 膜堆
• 分類程式碼代碼: 23151806
• eCl@ss: 32031623

属性

• 材料: PVDF ; silicone gasket
• 品質等級: 400
• 特點: hydrophilic
• 製造商／商標名: Prostak^™
• 參數: 2.1 bar max. transmembrane pressure (30 psi) at 50-80 °C; 4.1 bar max. inlet pressure (60 psi) at 50-80 °C; 4.1 bar max. transmembrane pressure (60 psi) at 50 °C; 5.5 bar max. inlet pressure (80 psi) at 50 °C
• dilution: (concentration and clarification)
• 高度: 4.6 cm (1.8 in.)
• 長度: 38.9 cm (15.3 in.)
• 寬度: 19.8 cm (7.8 in.)
• 設備尺寸: , 2 stack
• 過濾面積: 0.17 m²
• 膜標稱面積: 0.17 m²
• 重量: 1.6 kg (3.5 lb)
• 基質: Durapore^®
• 孔徑: 0.22 μm nominal pore size; 0.22 μm pore size
• pH值: 1-11(short duration); 2-10(continuous)

说明

一般說明

Prostak^™ MF Module are a tangential flow filtration device in a stacked plate configuration with Type V screen open feed channel. A microporous membrane, Durapore^® polyvinylidene fluoride (PVDF), is bonded on both sides of each plate. The plates are then stacked in parallel forming stacks.

This Prostak^™ microfiltration open-channel module features a Pore Size of 0.22 μm and a filtration area of 0.17 m². PSGVAG021 is available in a 2 stack, making it applicable for bench-top, pilot, and production scale systems.

The modules can be integrity tested and steam sterilized for 20 cycles.

Prostak^™ MF modules must be used with a support holder, which controls deflection and provides sanitary fittings for connection to external piping. Sanitary gaskets supplied with the module provide a leak-free connection between the module(s) and the holder.

應用

Typical Applications
Prostak^™ microfiltration is used for separations where viscosity and suspended solids levels of the feed stream require an open feed channel. They are typically used in perfusion applications or in the clarification/harvest of:

• Mammalian, bacterial and mycelial cell suspensions
• Emulsions and colloidal suspension
• Viruses, proteins and other bio-organic macromolecular solutions
• Polysaccharides and other high viscosity solutions
• Yeast, algae, and other high solids suspensions
• Protein precipitate
• Vaccines

特點和優勢

Type V screen open feed channel

其他說明

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Prefiltration Rquirements: 150 µm

法律資訊

Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany

Prostak is a trademark of Merck KGaA, Darmstadt, Germany