CN5003E06

Polygard^® CN筒式滤芯

nominal pore size 5.0 μm, cartridge nominal length × diam. 30 in. (757.0-765.0 mm) × 2.75 in. (70 mm)

• 分類程式碼代碼: 23151806

属性

• 材料: polypropylene filter
• 品質等級: 400
• 特點: hydrophilic
• 製造商／商標名: Polygard
• 參數: 4.8 bar max. differential pressure (70 psid) at 20 °C
• 柱標稱長度 × 直徑: 30 in. (757.0-765.0 mm) × 2.75 in. (70 mm)
• 雜質: ≤0.25 EU/mL bacterial endotoxins (LAL test, aqueous extraction)
• 重量法萃取物: ≤10 mg
• 孔徑: 5.0 μm nominal pore size; 5.0 μm pore size
• 輸入: sample type liquid
• 柱代碼: Code 0 (2-222; O-Ring)

说明

一般說明

The Polygard^® CN Cartridge Filter products are nominally rated filters designed for particle removal applications in liquids and gases. The pleated structure of Polygard^®-CN filter media minimizes pressure differentials during the filtration process, a 5.0 μm pore size and the all-polypropylene construction of these filters conveys low levels of extractables and broad chemical compatibility. Downstream filter performance is enhanced due to efficient particle and microorganism reduction.

Polygard-CN cartridge filters provide high throughput with minimal differential pressure. Cartridges are robust, strong, resilient and are designed to withstand multiple steam-in-place cycles.

Typical Applications
Polygard-CN cartridge filters are widely used in the beverage industry for liquid and gas filtration applications, for fining operations and bioburden reduction.

Regulatory Compliance
Polygard^® CN Cartridge Filters are designed, developed, and manufactured in accordance with a Quality Management System approved by an accredited registering body to an ISO 9000 Quality Systems Standard and are shipped with a Certificate of Quality. Each cartridge filter is supported by a Validation Guide for compliance with regulatory requirements.

For traceability and easy identification, each cartridge filter is marked with identifying characteristics.

Multiple Formats Available
A full range of Polygard^® CN Cartridge Filter sizes is available to suit your application requirements. A variety of connection options are offered for easy adaptation to existing housings.

準備報告

Sterilization: May be autoclaved for 10 cycles of 30 minutes at 126 °C or steam sterilized for 10 cycles for 30 minutes at 126 °C or hot water sanitized at 80 °C maximum for 30 minutes.

分析報告

Gravimetric Extractables: After autoclaving and a 24-hour soak in ASTM^® Type 1 reagent grade water at controlled room temperature, meets the USP Oxidizable Substances Test requirements of <50 mg.

其他說明

Directions for Use:

• Organism Retention: Microorganism reduction
• Mode of Action: Filtration (nominal)
• Application: BioProcessing
• Intended Use: Efficient particle and microorganism reduction
• Instructions for Use: Please refer to the Polygard^® and Clarigard^® Cartridges user guide
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations

法律資訊

ASTM is a registered trademark of American Society for Testing and Materials

CLARIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany

POLYGARD is a registered trademark of Merck KGaA, Darmstadt, Germany