1.50625

Purospher^®STAR RP-18 endcapped (5 µm) HPLC Columns

L × I.D. 100 mm x 3 mm LiChroCART^™ HPLC cartridge, manuCART^™ holder required for use

• 别名: Purospher^® STAR RP-18 endcapped (5µm) LiChroCART^™ 100-3
• 分類程式碼代碼: 41115700
• NACRES: SB.52

属性

• product name: Purospher^®STAR RP-18 封端（5 µm）, L × I.D. 100 mm x 3 mm LiChroCART^™ HPLC cartridge, manuCART^™ holder required for use
• 材料: stainless steel column
• 品質等級: 100
• agency: suitable for USP L1
• 產品線: Purospher^®
• 特點: endcapped
• 包裝: 1 ea of
• 標籤範圍: 17% Carbon loading
• 參數: 250 bar pressure; 65 °C max. temp.
• 技術: HPLC: suitable; LC/MS: suitable; mass spectrometry (MS): suitable (High)
• 柱長度 × 內徑: 10 cm × 3 mm
• 表面積: 330 m²/g
• 基質: fully porous particle
• 基質活性組: C18 bonding phase
• 粒徑: 5 μm
• 孔徑: 120 Å pore size
• 工作pH值範圍: 1.5-10.5
• 分離技術: reversed phase

说明

一般說明

Purospher^® STAR RP-18 endcapped, 5 µm HPLC columns are designed for universal use and allow the separation of basic, neutral, and metal chelating compounds with simple mobile phases and excellent peak symmetry. They are based on ultra-pure fully porous silica particles (Type B). These columns offer an outstanding stability from pH 1.5 to 10.5 over a wide temperature range, and suitability for up to 100% aqueous mobile phases. Plus, they demonstrate best all-round retention characteristics, as proven by the Tanaka test. Purospher^® STAR RP-18 endcapped, 5 µm LiChroCART^™ 100-3 is a cartridge column which requires a manuCART^™ cartridge column holder part number 1.51486.0001. The manuCART^™ can be used to hold one cartridge column with or without direct integration of a 4-4 mm guard column. The recommended guard column is Purospher^® STAR RP-18 endcapped (5 µm) LiChroCART^™ 4-4 part number 1.50250.0001. LiChroCART^™ cartridge columns mounted with a manuCART^™ cartridge column holder are hand-tight only and have therefore a maximum pressure stability of 250 bar. For higher pressure stability requirements Purospher^® STAR RP-18 endcapped, 5 µm Hibar^® RT 100-3 HPLC columns are available part number 1.50612.0001.The column dimension of 100 mm length x 3 mm I.D. is the optimal choice for HPLC separation of complex samples at lower flow rate, allowing significant solvent savings and improved sensitivity. A 3 mm I.D. column enables a more sustainable separations in comparison to 4 or 4.6 mm I.D. column due to the use of less solvent for the chromatographic separation.Learn more about Purospher^® STAR HPLC and UHPLC ColumnsLearn more about the Supelco HPLC Column portfolio and Method development:Brochure: HPLC and UHPLC Column Selection GuideBrochure: A Practical Guide to HPLC - Method Development Guide

應用

Intended to be used in the separation of aflatoxins, aldehydes, alkaloids, antibiotics, catecholamines, explosives, oligonucleotides, esters, fat soluble vitamins, lipids, fatty acids, flavonoids, ketones, nitrosamines, nucleosides, PAHs, PCBs, peptides, pesticides, phenols, phthalates, preservatives, steroids, metabolized steroids, sulfonamides, sweeteners, and water soluble vitamins.

特點和優勢

• Ultra-pure silica (99.999%) for excellent peak symmetry
• High separation efficiency
• Reproducible results from run-to-run and batch-to-batch
• Best all-round performance according to Tanaka
• Outstanding pH stability from pH 1.5 to 10.5
• No phase collapse when using highly aqueous mobile phases
• Good suitability for LC-MS applications

法律資訊

Hibar is a registered trademark of Merck KGaA, Darmstadt, Germany

LICHROCART is a trademark of Merck KGaA, Darmstadt, Germany

MANUCART is a trademark of Merck KGaA, Darmstadt, Germany

Purospher is a registered trademark of Merck KGaA, Darmstadt, Germany