Accéder au contenu
Merck
  • Application of electro-enhanced solid phase microextraction combined with gas chromatography-mass spectrometry for the determination of tricyclic antidepressants in environmental water samples.

Application of electro-enhanced solid phase microextraction combined with gas chromatography-mass spectrometry for the determination of tricyclic antidepressants in environmental water samples.

Journal of chromatography. A (2014-05-28)
Ruyi Xu, Hian Kee Lee
RÉSUMÉ

A fast and efficient method for the determination of tricyclic antidepressants using electro-enhanced solid phase microextraction (SPME) coupled to gas chromatography-mass spectrometry (GC-MS) has been developed. One advantage of this approach is that the mass transfer of target analytes from the sample solution to an SPME fiber can be accelerated by the electrical field, improving extraction selectivity and efficiency. In the present work, the target analytes extracted to the SPME fiber were thermally desorbed in the GC injection port after extraction. Under the optimized extraction conditions, the developed method exhibited low limits of detection (between 0.079 and 0.296μg/L) and good linearity over the concentration range of between 1 and 500μg/L with coefficients of determination (r(2)) of between 0.993 and 0.999. The relative standard deviations were lower than 9.2% for all analytes. The proposed method was applied to extract tricyclic antidepressants in environmental water samples.

MATÉRIAUX
Référence du produit
Marque
Description du produit

Sigma-Aldrich
Hydroxyde de sodium, ACS reagent, ≥97.0%, pellets
Sigma-Aldrich
Hydroxyde de sodium, reagent grade, ≥98%, pellets (anhydrous)
Sigma-Aldrich
Hydroxyde de sodium solution, 50% in H2O
Sigma-Aldrich
Hydroxyde de sodium solution, BioUltra, for molecular biology, 10 M in H2O
Sigma-Aldrich
Hydroxyde de sodium, BioXtra, ≥98% (acidimetric), pellets (anhydrous)
Sigma-Aldrich
Hydroxyde de sodium solution, 1.0 N, BioReagent, suitable for cell culture
Sigma-Aldrich
Hydroxyde de sodium, puriss. p.a., ACS reagent, reag. Ph. Eur., K ≤0.02%, ≥98%, pellets
Sigma-Aldrich
Hydroxyde de sodium, puriss., meets analytical specification of Ph. Eur., BP, NF, E524, 98-100.5%, pellets
Sigma-Aldrich
Hydroxyde de sodium, reagent grade, 97%, powder
Sigma-Aldrich
Divinylbenzene, technical grade, 80%
Sigma-Aldrich
Hydroxyde de sodium, pellets, semiconductor grade, 99.99% trace metals basis
Sigma-Aldrich
Hydroxyde de sodium solution, 5.0 M
Sigma-Aldrich
Hydroxyde de sodium, puriss. p.a., ACS reagent, K ≤0.02%, ≥98.0% (T), pellets
Sigma-Aldrich
Hydroxyde de sodium, beads, 16-60 mesh, reagent grade, 97%
Sigma-Aldrich
Hydroxyde de sodium, reagent grade, 97%, flakes
Sigma-Aldrich
Hydroxyde de sodium, BioUltra, for luminescence, ≥98.0% (T), pellets
Sigma-Aldrich
Divinylbenzene, technical grade, 55%
Sigma-Aldrich
Poly(dimethylsiloxane), viscosity 1.0 cSt (25 °C)
Sigma-Aldrich
Amitriptyline hydrochloride, ≥98% (TLC), powder
Sigma-Aldrich
Hydroxyde de sodium, ultra dry, powder or crystals, 99.99% trace metals basis
Supelco
Hydroxyde de sodium solution, 0.1 M NaOH in water (0.1N), Eluent concentrate for IC
Sigma-Aldrich
Hydroxyde de sodium solution, purum, ≥32%
Supelco
Hydroxyde de sodium solution, 49-51% in water, eluent for IC
Sigma-Aldrich
Hexaméthyldisiloxane, viscosity 0.65 cSt (25 °C)
Sigma-Aldrich
Clomipramine hydrochloride, ≥98% (HPLC), powder
Sigma-Aldrich
Sodium hydroxide-16O solution, 20 wt. % in H216O, 99.9 atom % 16O
USP
Amitriptyline hydrochloride, United States Pharmacopeia (USP) Reference Standard
Sigma-Aldrich
3-Ethyl-2,4-pentanedione, mixture of tautomers, 98%
Supelco
Amitriptyline hydrochloride, Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
Hydroxyde de sodium, anhydrous, free-flowing, Redi-Dri, reagent grade, ≥98%, pellets