Accéder au contenu
Merck
Toutes les photos(1)

Key Documents

View All Documentation

649821

Sigma-Aldrich

PEDOT

tetramethacrylate end-capped solution, 0.5 wt. % (dispersion in nitromethane), contains p-toluenesulfonate as dopant

Synonyme(s) :

Oligotron™ NM, PEDOT, PEDOT, tetramethacrylate end-capped

Se connecterpour consulter vos tarifs contractuels et ceux de votre entreprise/organisme
Toutes les photos(1)

About This Item

Numéro MDL:
MFCD06798809
Code UNSPSC :
12352103
Nomenclature NACRES :
NA.23

product name

Poly(3,4-ethylenedioxythiophene), tetramethacrylate end-capped solution, 0.5 wt. % (dispersion in nitromethane), contains p-toluenesulfonate as dopant

Poids mol.

~1,360-1,600 g/mol (methacrylate equivalent weight)
average Mn ~6,000

Niveau de qualité

100

Contient

p-toluenesulfonate as dopant

Composition

ethanol, 5.8 wt. %
isopropanol, 0.3 wt. %
nitromethane, 93.4 wt. %
Oligotron™ tetramethacrylate, 0.5 wt. %

Concentration

0.5 wt. % (dispersion in nitromethane)

Résistance

1-10 M Ω/sq (surface resistance of film)

Conductivité

0.1-0.5 S/cm (bulk)

Densité

1.127 g/mL at 25 °C

Vous recherchez des produits similaires ? Visite Guide de comparaison des produits

Description générale

Please follow this link for Aedotron/Oligotron selection guide table.

Application

For best results, agitate for 20 minutes prior to use. Spin coat as-is at 500 RPM for 9 seconds followed by 1500 RPM for 15 seconds. Photocurable inks can be formulated by adding acrylate monomers and photoinitiators (i.e.DMPA) to the nitromethane dispersion. The solvent must be evaporated prior to crosslinking. Functional compounds can be coupled to the oligomer via reactions at the methacrylate group.
Poly(3,4-ethylenedioxythiophene), tetramethacrylate end-capped solution (PEDOT-TMA) can be used as a hole injection layer (HIL) which can be used in optoelectronic applications such as light emitting diodes (LEDs), biosensors, and energy storage devices.
Suitable for spin coating applications.
Used for depositing thin films of conducting EDOT oligomers for sensors, antistatic layers, organic solar cells and flexible electronics.

Caractéristiques et avantages

End-capped structure renders the conducting oligomer PEDOT dispersible. The methacrylate groups offer the potential for crosslinking, or additional chemical functionalization. Nitromethane has a suitable volatility for spin coating applications.

Attention

Store this product at room temperature (do not refrigerate or freeze). Some settling will normally occur. Agitate, sonicate, and filter prior to use. A plug of glass wool in a pipette can be used for easy filtration. The shelf life of this product will vary depending on how it is stored and handled. Product should be discarded if heavy aggregation occurs, or if sonication / filtering are inadequate to produce a good casting solution.

Informations légales

Oligotron is a trademark of TDA Research, Inc.

Pictogrammes

FlameHealth hazardExclamation mark
GHS02,GHS08,GHS07

Mention d'avertissement

Warning

Mentions de danger

H226,H302 + H332,H351,H361d

Classification des risques

Acute Tox. 4 Inhalation - Acute Tox. 4 Oral - Carc. 2 - Flam. Liq. 3 - Repr. 2

Code de la classe de stockage

3 - Flammable liquids

Classe de danger pour l'eau (WGK)

WGK 2

Point d'éclair (°F)

96.8 °F - closed cup

Point d'éclair (°C)

36 °C - closed cup

Équipement de protection individuelle

Eyeshields, Faceshields, Gloves, type ABEK (EN14387) respirator filter

Faites votre choix parmi les versions les plus récentes :

Certificats d'analyse (COA)

Lot/Batch Number
MKCS3542
MKCH6333
MKCD9882
MKBW9329V
MKBK4044V

Vous ne trouvez pas la bonne version ?

Si vous avez besoin d'une version particulière, vous pouvez rechercher un certificat spécifique par le numéro de lot.

Rechercher un(e) COA

Déjà en possession de ce produit ?

Retrouvez la documentation relative aux produits que vous avez récemment achetés dans la Bibliothèque de documents.

Consulter la Bibliothèque de documents

Highly aligned carbon nanotube/polymer composites with much improved electrical conductivities
Peng H and Sun X
Chemical Physics Letters, 471(1-3), 103-105 (2009)
Cristina Ocaña et al.
Talanta, 186, 279-285 (2018-05-23)
We report here the fabrication of solid-contact calcium-selective electrodes (Ca2+-SCISEs) made of a polyurethane acrylate ion-selective membrane (ISM) that was covalently attached to the underlying ion-to-electron transducer (solid-contact). Methacrylate-functionalized poly(3,4-ethylenedioxythiophene) (Meth-PEDOT) and Meth-PEDOT films containing either multiwalled carbon nanotubes (MWCNT)

Articles

Conjugated Polymers for the Engineering of Device/Tissue Interface

Conjugated polymers offer charge transport between inorganic, electrically conducting metals and organic, proton-conducting biological systems.

Flexible and Printed Organic Thermoelectrics: Opportunities and Challenges

Progress in Organic Thermoelectric Materials & Devices including high ZT values of >0.2 at room temperature by p-type (PEDOT:PSS) & n-type (Poly[Kx(Ni-ett)]) materials are discussed.

Conducting Polymer Device Applications

The application of conducting polymers at the interface with biology is an exciting new trend in organic electronics research.

Notre équipe de scientifiques dispose d'une expérience dans tous les secteurs de la recherche, notamment en sciences de la vie, science des matériaux, synthèse chimique, chromatographie, analyse et dans de nombreux autres domaines..

Contacter notre Service technique