22656

Tapones de goma revestidos de PTFE SS-174

diam. 9.5 mm ( 3/8 in.), pkg of 100 ea

• UNSPSC Code: 41115718
• NACRES: SB.54
• Material: off-white silicone body (123 mil thick), yellow PTFE face (2 mil thick)
• Packaging: pkg of 100 ea

Propiedades

• material: off-white silicone body (123 mil thick), yellow PTFE face (2 mil thick)
• packaging: pkg of 100 ea
• technique(s): gas chromatography (GC): suitable using :Suitable
• diam.: 9.5 mm ( 3/8 in.)

Descripción

General description

PTFE-faced septa are designed for applications where greater inertness is required. The off-white silicone rubber body (123 mil thick) provides plenty of support for the yellow PTFE face (2 mil thick). After the PTFE is ruptured during injection, some bleeding may occur. Because this bleed increases as more of the rubber is exposed, we recommend using a needle guide to reduce the size of the punctured area. For use with 200 °C to 300 °C inlet temperatures.

PTFE-faced septa are suitable to overcome the degradation due to prolonged high temperatures which occurs in silicone rubber septa. The degradation results in baseline drift and additional peaks. It is generally fixed with the PTFE faced towards the column packing.

Application

Glass vials equipped with stir bars may be sealed with PTFE faced silicone septa for solvent drop microextraction analysis of water samples. This may be used in sealing the vials used for headspace solid-phase microextraction (HS-SPME) procedure during determination of aldehydes in drinking water.