Mol Sieve 5A is commonly packed in columns for the analysis of permanent gases via Gas Chromatography.
20302
Molecular Sieve, 5Å
60-80 mesh, bottle of 50 g
Seleccione un Tamaño
120,00 €
Seleccione un Tamaño
About This Item
120,00 €
Productos recomendados
Nombre del producto
Molecular Sieve Adsorbent, matrix Molecular Sieve 5A, 60-80 mesh, bottle of 50 g
Agency
suitable for USP/NF nitrogen
Formulario
solid
envase
bottle of 50 g
Matriz
Molecular Sieve 5A
tamaño de partícula
60-80 mesh
tamaño de poro
5 Å pore diameter
densidad
~0.72 g/mL (free fall density)
¿Está buscando productos similares? Visita Guía de comparación de productos
Categorías relacionadas
Descripción general
For more information about any of our adsorbents, please visit sigma-aldrich.com/adsorbents
Palabra de señalización
Warning
Frases de peligro
Consejos de prudencia
Clasificaciones de peligro
STOT RE 2 Inhalation
Órganos de actuación
Lungs
Código de clase de almacenamiento
13 - Non Combustible Solids
Clase de riesgo para el agua (WGK)
nwg
Punto de inflamabilidad (°F)
Not applicable
Punto de inflamabilidad (°C)
Not applicable
Equipo de protección personal
Eyeshields, Gloves, type N95 (US)
Elija entre una de las versiones más recientes:
Certificados de análisis (COA)
It looks like we've run into a problem, but you can still download Certificates of Analysis from our Documentos section.
Si necesita más asistencia, póngase en contacto con Atención al cliente
¿Ya tiene este producto?
Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.
Los clientes también vieron
-
How is Supelco's Molecular Sieve 5A, Product No. 20302, commonly used?
1 respuesta-
¿Le ha resultado útil?
-
-
How do you condition Molecular Sieve 5A, Product 20302, when used in a packed column?
1 respuesta-
Attach the column to your GC injection port, establish a flow rate of at least 25 mL/min carrier gas, purge with carrier gas at room temperature for 30 minutes, increase oven temperature to 225°C at a rate of 4°C/min, and allow the column to condition at 225°C for 8-12 hours. After conditioning, allow the oven to cool to room temperature, turn off the carrier flow and allow the pressure to go to zero. Then reinstall the column into both the injector port and detector port, and establish desired carrier flow rate. The column should then be ready to use.
¿Le ha resultado útil?
-
-
Is this product a packed column?
1 respuesta-
This is packing material only; it is not a column. Some endusers will purchase this bottle of packing and prepare their own packed columns.
¿Le ha resultado útil?
-
-
What is the Department of Transportation shipping information for this product?
1 respuesta-
Transportation information can be found in Section 14 of the product's (M)SDS.To access the shipping information for this material, use the link on the product detail page for the product.
¿Le ha resultado útil?
-
-
How can I purchase a column that is packed with this material?
1 respuesta-
Most packed column are custom made and require that you obtain a quotation. Please contact our Customer & Sales Services group at phone number (800)-247-6628, fax number (800)-447-3044 or email [email protected] for additional information.
¿Le ha resultado útil?
-
-
What does 5A refer to in Molecular Sieve 5A, Product 20302?
1 respuesta-
5A is a grade of Mol Sieve and refers to a nominal pore size of 5 Angstroms
¿Le ha resultado útil?
-
-
What does the 60/80 stand for in the product description?
1 respuesta-
The 60/80 refers to the mesh size range of the actual particles. When working with mesh size: the larger the mesh number, the smaller the diameter of the particle. In this case 60 refers to a diameter of 250 microns and 80 refers to a diameter of 177 microns. Therefore; the particles in this product with 60/80 will range between 177 microns and 250 microns.
¿Le ha resultado útil?
-
-
What is the maximum temperature for this packing?
1 respuesta-
The maximum temperature for this packing is 400 °C.
¿Le ha resultado útil?
-
Filtros activos
Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.
Póngase en contacto con el Servicio técnico