Z742205
Hi/Lo profile rocker
Rocker with 3 Platforms, AC/DC input 220 V AC, Schuko plug
Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
About This Item
Código UNSPSC:
41103811
NACRES:
NB.73
Productos recomendados
Características
CE compliant
fabricante / nombre comercial
IBI ROCLS0006
Parámetros
0-60 °C temp. range
plataforma tamaño
12 in. × 12 in.
tamaño
13.75 in. × 15.75 in. × 3.75 in.
peso
16 lb
¿Está buscando productos similares? Visita Guía de comparación de productos
Descripción general
The heavy-duty, Hi Low Profile Rocker unit is designed for versatility. It operates on bench tops, in high humidity or dry incubators, in high temperature ovens (to 65°C), and refrigerated units (to 0°C). Typical applications include: Staining and Destaining Gels, Northern and Southern Hybridizations, Western Blotting and Rinsing Membranes, Cell Culture Incubation, and Phage Elutions or Amplification of cDNA libraries.
The Hi Lo Profile Rocker fits easily into laboratory incubators, ovens, and refrigerated units without rearranging shelves or disturbing other materials. The thin, flat power cord reaches external outlets without damaging incubator or refrigerator gaskets. The platform is continuously adjustable from 2° to 11° and can be effortlessly changed in 15 seconds. The speed varies from 0 - 22rpm with no cogging at slow speeds.
All finishes and hardware are stainless steel and the rocker can be easily disassembled for sterilizing in the autoclave. The rocker can hold a maximum load of 20lbs. A maximum of 4 rocker platforms increases the rocker capacity using the same amount of bench space. A non-skid silicone mat comes with each platform to hold and stabilize loads.
The Hi/Lo Rocker operates on a permanent magnet 24VDC motor.
The Hi Lo Rocker was previously manufactured by Stovall Scientific. All IBI accessories and replacement parts are compatible with the Stovall Hi Lo Profile Rocker.
The Hi Lo Profile Rocker fits easily into laboratory incubators, ovens, and refrigerated units without rearranging shelves or disturbing other materials. The thin, flat power cord reaches external outlets without damaging incubator or refrigerator gaskets. The platform is continuously adjustable from 2° to 11° and can be effortlessly changed in 15 seconds. The speed varies from 0 - 22rpm with no cogging at slow speeds.
All finishes and hardware are stainless steel and the rocker can be easily disassembled for sterilizing in the autoclave. The rocker can hold a maximum load of 20lbs. A maximum of 4 rocker platforms increases the rocker capacity using the same amount of bench space. A non-skid silicone mat comes with each platform to hold and stabilize loads.
The Hi/Lo Rocker operates on a permanent magnet 24VDC motor.
The Hi Lo Rocker was previously manufactured by Stovall Scientific. All IBI accessories and replacement parts are compatible with the Stovall Hi Lo Profile Rocker.
Características y beneficios
- Operates in cold rooms and CO2 incubators (0 - 60°)
- Adjustable speed (0 - 22RPM) and tilt control (2 - 11°)
- Platforms are 12" x 12" and hold up to 20lbs total weight
- Comes with: flat power cord, white silicone mat, and operation manual
Otras notas
Comes with Hi/Lo Rocker – 220V unit (Z367753) and the 3 Platform Kit (Z367796).
The 3 Platform Kit comes with all of the parts necessary to add three platforms to the standard rocker for a total of four platforms.
The 3 Platform Kit comes with all of the parts necessary to add three platforms to the standard rocker for a total of four platforms.
Certificados de análisis (COA)
Busque Certificados de análisis (COA) introduciendo el número de lote del producto. Los números de lote se encuentran en la etiqueta del producto después de las palabras «Lot» o «Batch»
¿Ya tiene este producto?
Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.
Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.
Póngase en contacto con el Servicio técnico