CLS3569

Corning^® disposable spinner flask, with aseptic, 1 L

• Sinónimos: Corning spinner flask, Disposable spinner flask
• NACRES: NB.43
• UNSPSC Code: 41121804
• eCl@ss: 32040501
• Capacity: 1000 mL
• Material: high-density polyethylene cap, polystyrene , screw top cap
• Sterility: sterile; γ-irradiated
• Packaging: case of 6
• Feature: cap, closure type Screw cap

Propiedades

• material: high-density polyethylene cap, polystyrene , screw top cap
• sterility: sterile; γ-irradiated
• feature: cap, closure type Screw cap
• packaging: case of 6
• manufacturer/tradename: Corning 3569
• availability: available only in South Korea
• technique(s): cell culture: suitable
• capacity: 1000 mL
• working volume: 300-1000 mL
• fitting: cap for GL 45, GL 45 neck

Descripción

Features and Benefits

• Each system is packaged in a separate, double bag
• Flask body is made up of polystyrene, caps from high-density polyethylene, and polypropylene is used to make the paddle and shaft
• Side arm of a preassembled flask has one connector attached with a flat cap on an opposite side arm
• Without having to adjust the height of the paddle, the extended paddle design ensures constant liquid motion from top to bottom
• Dead spots are removed by the paddle′s bottom contours, which hug the flask′s shape
• Two large neck openings allow for easy pouring
• To ensure better mixing and maximize cell production vertical side baffles break up laminar flow
• Gamma-irradiated sterilized with sterility assurance level (SAL) of 10^-6 and meets the bacteriostasis, fungistasis, and sterility standards of USP XXIV:71
• A 25mm-diameter vent filter with a polyvinylidene fluoride (PVDF) membrane and 0.2-micron pores and a barbed fitting completes the venting port
• Only for single use, flasks cannot be alcohol-resterilized or autoclaved, materials will deteriorate in any attempt to do so
• Aseptic transfer and vented caps are available optionally
• A rigid polypropylene dip tube that is angled to reach the flask′s bottom is attached to the liquid transfer port′s internal end
• Compatible with corning microcarriers in both suspension and adherent cell culture applications
• A heat-sealable and chemically resistant tubing ends in a male luer lock (MLL) connector closed with a female luer sealing cap on the external side

Legal Information

Corning is a registered trademark of Corning, Inc.