P2C100C25

Módulo de ultrafiltración Pellicon^® 2 maxi

filtration area 2.5 m², NMWCO 100 kDa

• Sinónimos: Pellicon 2 Maxi Ultrafiltration Module PLCHK C 2.5 m²
• Código UNSPSC: 23151806

Propiedades

• Materiales: composite regenerated cellulose (CRC) ; polypropylene screen; polyurethane adhesive
• Nivel de calidad: 400
• fabricante / nombre comercial: Pellicon^®
• Parámetros: 0.33 bar max. transmembrane pressure (5 psig) (reverse); 3.5 bar max. transmembrane pressure (50 psig) at 30 °C (forward); 5-35 L/min recirculation rate at 0.4 bar (6 psi)
• técnicas: analytical sample preparation: suitable; protein purification: suitable
• Altura: 7.6 cm (3 in.)
• Longitud: 21 cm (8.3 in.)
• Anchura: 17.8 cm (7.0 in.)
• filtración área: 2.5 m²
• membrane nominal area: 2.5 m²
• extraíbles gravimétricos: ≤1500 mg/m²
• matriz: Ultracel^®
• tamaño de poro: 100 kDa NMWCO
• pH: 2-13

Descripción

Descripción general

The Pellicon^® 2 Ultrafiltration PLCHK Maxi Cassette sets the standard in cassette-style tangential flow filtration devices. P2C100C25 was designed with process scale-up and applications development in mind.

Millipore′s PLCHK polyethersulfone membrane has void-free structures that guard against leakage of solutes through microdefects normally associated with voids beneath the thin skins of conventional UF membranes. These void-free membranes are more permeable, resulting in high-flux with equivalent or superior product retention. These void-free membranes provide the advantages of fast, high yield processing and smaller systems.

The Pellicon^® 2 Maxi Ultrafiltration Module feature a filtration area of 2.5 m² with a pore size of 100 kDa NMWCO.

Aplicación

Concentration, desalting or buffer exchange of:

• Protein solutions
• Polysaccharide solutions
• Virus suspensions

Harvest, washing or clarification of:

• Cell cultures and lysates
• Colloidal suspensions
• Viral cultures

Características y beneficios

• Type C screen (coarse screen)
• Leading-edge void- free membranes to match virtually any separation challenge
• Short flow path for higher flux and higher resolution separation capability
• Choice of flow channel configuration providing process optimization capability
• Predictable, fast, scale-up
• True linear scalability from laboratory size modules to industrial assemblies for processing thousands of liters
• Brings higher resolution, improved yields and superior back-pressure resistance
• Ultracel membranes are composite membranes cast on a microporous substrate for defect-free membranes with superior

Otras notas

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Prefiltration Rquirements: 100 µm

Nota de análisis

Gravimetric Extractables: after a water flush

Información legal

Pellicon is a registered trademark of Merck KGaA, Darmstadt, Germany

ULTRACEL is a registered trademark of Merck KGaA, Darmstadt, Germany

Información de seguridad

• Código de clase de almacenamiento: 10 - Combustible liquids
• Clase de riesgo para el agua (WGK): WGK 2