1.04213
New fuchsin (C.I. 42520)
About This Item
Formulario
solid
Nivel de calidad
composición
Dye, ≥75% spectrophotometric assay
pH
3-4 (20 °C, 10 g/L in H2O)
solubilidad
practically insoluble 10 g/L
densidad aparente
450 kg/m3
aplicaciones
diagnostic assay manufacturing
hematology
histology
temp. de almacenamiento
2-30°C
InChI
1S/C22H24N3.ClH/c1-13-10-16(4-7-19(13)23)22(17-5-8-20(24)14(2)11-17)18-6-9-21(25)15(3)12-18;/h4-12H,23-25H2,1-3H3;1H/q+1;/p-1
Clave InChI
ORDGVBRMUJCHEO-UHFFFAOYSA-M
¿Está buscando productos similares? Visita Guía de comparación de productos
Categorías relacionadas
Descripción general
The dye is used in Ziehl-Neelsen and Gram staining as well as for methods with Schiff′s reagent.
The cell wall of acid-fast bacteria (AFB) has a high proportion of wax and lipids and hence absorbs dyes only very slowly. As a measure to enhance the absorption of the fuchsin dye and thus the formation of the mycolate-fuchsin complex in the cell wall, the carbolfuchsin solution applied to the specimen is normally heated to evaporation point. If the Kinyoun carbolfuchsin solution is used, the heating of the solution is dispensable. Consequently, the release of hazardous phenolic vapors will be avoided.
Once the AFB have absorbed the fuchsin dye, it is virtually impossible to decolorize them again, even when they are intensively treated with a decolorizing solution such as e. g. hydrochloric acid in ethanol. Accordingly, AFB are termed as acid- and alcohol-fast for staining, and are stained red in the microscopic visualization. Correspondingly, all non-acid-fast microorganisms are counterstained with an appropriate dye.
Pretreatment of the specimens with Sputofluol™ dissolves the bacteria from the surrounding viscid sputum and cell material. Sputofluol™ also has a disinfectant effect, with the result that any microorganisms that are present are killed off.
As Certistain® dye it is chemically quality-certified according to highest standards and strict specifications.
Aplicación
Nota de análisis
Identity (UV/VIS-Spectrum): passes test
Absorption maximum λ max (ethanol 50 %): 553 - 556 nm
Spec. Absorptivity A 1%/1cm (λ<SUB>m</SUB><SUB>a</SUB><SUB>x</SUB>; 0.003 g/l; ethanol 50 %): 1810 - 2430
TLC-Test: passes test
Loss on drying (110 °C): ≤ 10 %
Suitability for microscopy: passes test
Información legal
Palabra de señalización
Danger
Frases de peligro
Consejos de prudencia
Clasificaciones de peligro
Aquatic Acute 1 - Aquatic Chronic 1 - Carc. 1B - Eye Irrit. 2 - Skin Irrit. 2 - STOT SE 3
Órganos de actuación
Respiratory system
Código de clase de almacenamiento
6.1C - Combustible, acute toxic Cat.3 / toxic compounds or compounds which causing chronic effects
Clase de riesgo para el agua (WGK)
WGK 3
Listados normativos
Los listados normativos se proporcionan para los productos químicos principalmente. Para los productos no químicos sólo se puede proporcionar información limitada. Si no hay ninguna entrada, significa que ninguno de los componentes está en la lista. Es obligación del usuario garantizar el uso seguro y legal del producto.
EU REACH Annex XVII (Restriction List)
Certificados de análisis (COA)
Busque Certificados de análisis (COA) introduciendo el número de lote del producto. Los números de lote se encuentran en la etiqueta del producto después de las palabras «Lot» o «Batch»
¿Ya tiene este producto?
Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.
Filtros activos
Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.
Póngase en contacto con el Servicio técnico