The glass is ITO coated on one side. The coated side may be determined by holding the glass to the light. It will appear lightly opaque and may display a slight difference in color.
578274
Indium tin oxide coated glass slide, rectangular
surface resistivity 8-12 Ω/sq, slide
Sinónimos:
ITO, ITO coated slide, rectangular
Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
Seleccione un Tamaño
10 PKG
688,00 €
25 PKG
1720,00 €
688,00 €
Póngase en contacto con nuestro Servicio de Atención al Cliente para disponibilidad
Solicitar un pedido a granel
Seleccione un Tamaño
Cambiar Vistas
10 PKG
688,00 €
25 PKG
1720,00 €
About This Item
Fórmula lineal:
In2O3 · (SnO2)x
Número de CAS:
Número MDL:
Código UNSPSC:
12352103
ID de la sustancia en PubChem:
NACRES:
NA.23
688,00 €
Póngase en contacto con nuestro Servicio de Atención al Cliente para disponibilidad
Solicitar un pedido a granel
Productos recomendados
Nivel de calidad
envase
pack of 10 slides
pack of 25 slides
resistividad de superficie
8-12 Ω/sq
L × An × grosor
75 mm × 25 mm × 1.1 mm
transmitancia
>83%
índice de refracción
n20/D 1.517 (lit.)
cadena SMILES
O=[Sn]=O.O=[In]O[In]=O
InChI
1S/2In.5O.Sn
Clave InChI
LNNWKAUHKIHCKO-UHFFFAOYSA-N
¿Está buscando productos similares? Visita Guía de comparación de productos
Descripción general
Indium tin oxide (ITO) is widely used as transparent conducting oxides. Its major characteristics are electrical conductivity, optical transparency and the ease to be deposited as films.[1]
Aplicación
Propiedades físicas
Thickness of ITO coating is 1200-1600 Å.
Resistance may increase to as high as 30 Ω when exposed to temperatures of 300 °C for 30 minutes or more.
Resistance may increase to as high as 30 Ω when exposed to temperatures of 300 °C for 30 minutes or more.
Código de clase de almacenamiento
13 - Non Combustible Solids
Clase de riesgo para el agua (WGK)
WGK 3
Punto de inflamabilidad (°F)
Not applicable
Punto de inflamabilidad (°C)
Not applicable
Equipo de protección personal
dust mask type N95 (US), Eyeshields, Gloves
Elija entre una de las versiones más recientes:
¿Ya tiene este producto?
Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.
Los clientes también vieron
Online coupling of digital microfluidic devices with mass spectrometry detection using an eductor with electrospray ionization.
Baker CA and Roper MG
Analytical Chemistry, 2955-2960 (2012)
Katsuji Hattori et al.
Antioxidants & redox signaling, 13(8), 1157-1167 (2010-05-22)
Local responses of energy metabolism during brain ischemia are too heterogeneous to decipher redox distribution between anoxic core and adjacent salvageable regions such as penumbra. Imaging mass spectrometry combined by capillary electrophoresis/mass spectrometry providing quantitative metabolomics revealed spatio-temporal changes in
Preparation of non-annealed anatase TiO< sub> 2</sub> film on ITO substrate by anodizing in hot phosphate/glycerol electrolyte for dye-sensitized solar cells.
Tsuji E, et al.
Materials Letters, 91, 39-41 (2013)
High-resolution frequency-modulation atomic force microscopy in liquids using electrostatic excitation method.
Umeda K, et al.
Applied Physics Express, 3(6), 065205-065205 (2010)
Andreas Herrmann et al.
Chemistry (Weinheim an der Bergstrasse, Germany), 15(1), 117-124 (2008-12-17)
Application of an electric field to liquid crystalline film forming imines with negative dielectric anisotropy, such as N-(4-methoxybenzylidene)-4-butylaniline (MBBA, 1), results in the expulsion of compounds that do not participate in the formation of the liquid crystalline phase. Furthermore, amines
Artículos
Organic Semiconductor Laser Materials
Professor Shinar highlights low-cost, disposable sensor configurations in organic and hybrid electronics for healthcare applications.
Organic photovoltaics (OPVs) represent a low-cost, lightweight, and scalable alternative to conventional solar cells. While significant progress has been made in the development of conventional bulk heterojunction cells, new approaches are required to achieve the performance and stability necessary to enable commercially successful OPVs.
A transparent conductive electrode (TCE) is an essential component of various optoelectronic devices such as solar cells, liquid-crystal displays (LCD), light-emitting diodes (LED), and touch screens.
Protocolos
Selenium's roles range from essential dietary element to semiconductor in advanced applications like xerography.
-
Is the glass coated with ITO on one side or both sides?
1 respuesta-
¿Le ha resultado útil?
-
-
Is it possible to etch 578274-10PAK Indium tin oxide coated glass slides with E-beam lithography?
1 respuesta-
It is uncertain whether E-beam lithography will work for this purpose. The most common method for ITO (Indium Tin Oxide) patterning is photolithography. For simple patterning, a laser patterning system, specifically a fiber laser source, can be utilized. Alternatively, a CO2 laser source is capable of etching the glass. However, it's important to note that using a fiber laser can be challenging without prior experience, as it may lead to the redeposition of material on the glass along the laser path, which is non-removable.
¿Le ha resultado útil?
-
-
For Product 578274, what is the melting point of Indium tin oxide coated glass slide, rectangular?
1 respuesta-
Unfortunately, the melting point is not determined for this product.
¿Le ha resultado útil?
-
-
What is the Department of Transportation shipping information for this product?
1 respuesta-
Transportation information can be found in Section 14 of the product's (M)SDS.To access the shipping information for this material, use the link on the product detail page for the product.
¿Le ha resultado útil?
-
-
How do I clean Product 578274, Indium tin oxide coated glass slide?
1 respuesta-
To clean ITO slides, the manufacturer recommends to immerse the slides in a 20 weight % solution of ethanolamine in deionized water, heat to 80°C in an ultrasonic bath for 10-15 minutes. After this step, the slides should be removed and rinsed several times with deionized water, and finally dried with pure nitrogen gas to avoid water spotting.
¿Le ha resultado útil?
-
-
What method can be used to etch Product 578274, Indium tin oxide coated glass slide?
1 respuesta-
Per the manufacturer, an aqueous solution of 20% hydrochloric acid, 5% nitric acid and a few drops of liquid detergent to promote wetting of the ITO surface will remove ITO. If this solution is heated to 55°C, it will typically etch 100 ohm ITO coating in 30-60 seconds, or if the etching is carried out at room temperature, it will take six to ten minutes. Differences in the morphology of the coating, the thickness of the coating (more conductive coatings will be thicker), and changes in the purity or concentration of the acid solution will effect the time required to remove the ITO. Please be advised that ITO coatings can be lost if they come into direct contact with mineral acids and strong organic acids. Therefore, direct contact with these agents should be avoided. After the etching process is complete, the slides should be immediately rinsed in a 10% aqueous solution of sodium carbonate to neutralize any residual acid. To avoid water spotting, blow dry the slides with pure nitrogen gas.
¿Le ha resultado útil?
-
-
What type of glass is Product 578274, Indium tin oxide coated glass slide, made of?
1 respuesta-
The slide is made with soda lime float glass. Molten glass is floated on a pool of liquid tin under a nitrogen/hydrogen atmosphere. This high volume process results in glass which does not require grinding or polishing to achieve a high-quality finish. Float glass will typically have a strain point of 523°C, a CTE of 77-85 x 107 / °C, and a refractive index of 1.517. Typical composition of float glass is 72.6% SiO2, 0.8% B2O3, 1.7% Al2O3, 4.6% CaO, 3.6% MgO, and 15.2% Na2O.
¿Le ha resultado útil?
-
-
For Product 578274, Indium tin oxide coated glass slide, what is the passivation layer, and what is it's purpose?
1 respuesta-
ITO coated float glass is only offered with a SiO2 passivation layer applied directly on the glass prior to ITO coating. The passivation layer is intended to minimize the leaching of alkali oxides into liquid crystals, which can have a detrimental effect on the volume resistivity of the liquid crystal.
¿Le ha resultado útil?
-
Filtros activos
Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.
Póngase en contacto con el Servicio técnico
