Z231398
Weighted safety shield
H 30 in.
Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
About This Item
UNSPSC Code:
46181702
NACRES:
NB.35
Productos recomendados
material
transparent acrylic
packaging
pkg of (packaged in one carton)
H
30 in.
762 mm
W × D
19 1/2 in. × 6 1/2 in.
thickness
3/8 in.
¿Está buscando productos similares? Visita Guía de comparación de productos
General description
High impact resistance. Three-sided construction for stability and protection on both front and sides.
Ideal observation barrier. Work can be conducted behind the 3/8" shield, while workers or technicians are protected from splash, flying particles and 1 Mev of beta radiation. Shield incorporates a seamless one-piece acrylic barrier with straight front and two 45-degree angles.
The base is made from chemical resistant natural polypropylene and the base/platform is approximately 20" x 20" x 1/2" thick. On the underside of the base there are four rubber feet (one on each corner). The rubber feet provide cushioned protection for tabletops. All parts are pre-drilled and ready for assembly. Stainless steel machine screws and self-locking nuts also included.
Phillips Head Screwdriver and small adjustable wrench are required for assembly. Because the product may be used where splash could occur, an indirect vent Face-Fit cover goggle is included.
Suitable for compliance with OSHA CFR Part1910.1030.
Ideal observation barrier. Work can be conducted behind the 3/8" shield, while workers or technicians are protected from splash, flying particles and 1 Mev of beta radiation. Shield incorporates a seamless one-piece acrylic barrier with straight front and two 45-degree angles.
The base is made from chemical resistant natural polypropylene and the base/platform is approximately 20" x 20" x 1/2" thick. On the underside of the base there are four rubber feet (one on each corner). The rubber feet provide cushioned protection for tabletops. All parts are pre-drilled and ready for assembly. Stainless steel machine screws and self-locking nuts also included.
Phillips Head Screwdriver and small adjustable wrench are required for assembly. Because the product may be used where splash could occur, an indirect vent Face-Fit cover goggle is included.
Suitable for compliance with OSHA CFR Part1910.1030.
Application
This product is designed to act as an "engineering control" or barrier to provide a degree of protection for those in front of the barrier from splashing and splattering. This shield will not provide any degree of protection from an "explosive" incident.
Certificados de análisis (COA)
Busque Certificados de análisis (COA) introduciendo el número de lote del producto. Los números de lote se encuentran en la etiqueta del producto después de las palabras «Lot» o «Batch»
¿Ya tiene este producto?
Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.
Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.
Póngase en contacto con el Servicio técnico