This product is supplied as a powder, but the packaging is listed in liters (L) because it represents the final volume of medium that can be prepared after reconstitution, not the weight of the powder. Per product information, this product is formulated at 4.4 g of powder per liter of medium.
Sélectionner une taille de conditionnement
| Taille/Référence | Disponibilité | Prix |
|---|
A propos de cet article
form
powder
Quality Segment
technique(s)
cell culture | plant: suitable
application(s)
agriculture
storage temp.
2-8°C
General description
Application
Preparation Note
Formulation du milieu
1 of 1
Cet article | |||
|---|---|---|---|
| description powder, suitable for plant cell culture | description powder, suitable for plant cell culture, with Gamborg′s vitamins | description suitable for plant cell culture, with sucrose and agar | description powder, suitable for plant cell culture |
| form powder | form powder | form powder | form powder |
| application(s) agriculture | application(s) agriculture | application(s) agriculture | application(s) agriculture |
| technique(s) cell culture | plant: suitable | technique(s) cell culture | plant: suitable | technique(s) cell culture | plant: suitable | technique(s) cell culture | plant: suitable |
| storage temp. 2-8°C | storage temp. 2-8°C | storage temp. 2-8°C | storage temp. 2-8°C |
| Quality Level 200 | Quality Level 200 | Quality Level 200 | Quality Level 100 |
Still not finding the right product?
Explore all of our products under Milieu de base de Murashige et Skoog
Mot-clé
Warning
Codes de danger
Mentions de précaution
Hazard Classifications
Eye Irrit. 2 - Ox. Sol. 3
Classe de stockage
5.1B - Oxidizing hazardous materials
Que se passe-t-il ?
WGK 2
Point d'éclair (°F)
Not applicable
Point d'éclair (°C)
Not applicable
Faites votre choix parmi les versions les plus récentes :
Déjà en possession de ce produit ?
Retrouvez la documentation relative aux produits que vous avez récemment achetés dans la Bibliothèque de documents.
-
Porque no produto consta 1L, 5L e 50L? O correto seria em g?
1 answer-
Helpful?
-
-
How do I prepare this medium?
1 answer-
The preparation instructions for this product are as follows:
1. Using a container twice the size of the desired final volume, measure out ~90% of the required final volume of tissue culture grade water (e.g., Catalog Number W3500). Example: 900 ml for a final volume of 1000 ml.
2. While stirring, add the powdered product.
3. Rinse the original container with a small volume of tissue culture grade water to remove traces of the powder. Add to the solution in step 2.
4. Add desired supplements (e.g., sucrose, gelling agent, auxins, cytokinins).
Add heat labile constituents after autoclaving.
5. While stirring, adjust to the desired pH (e.g., 5.7±0.1) using KOH, NaOH, or HCl.
6. Add additional tissue culture grade water to bring the medium to the final volume.
7. If a gelling agent is used, heat the solution to clarity while stirring.
8. Dispense the medium into culture vessels before or after autoclaving according to the application.
Add heat labile constituents after autoclaving.
9. Sterilize the medium in a validated autoclave at 1 kg/cm2 (15 psi). The medium should attain a temperature of 121 °C for at least 15 minutes.Please see the link below to review this and additional information available in the product datasheet:
https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/product/documents/361/537/m5519pis.pdfHelpful?
-
-
What is the difference between Product M5519, Murashige and Skoog (MS) Basal Medium and M5524, Murashige and Skoog Basal Salt Mixture?
1 answer-
Product M5524 is the Murashige and Skoog(M&S) Basal Salt Mixture, only. The M5519 products is M&S Basal Medium which also includes the vitamins myo-Inositol, Nicotinic acid and Pyridoxine HCl. These formulations are identical with the exception of vitamin components. With the addition of 1 mL of M7150 M&S Vitamin Solution, the composition of each medium is equivalent.
Helpful?
-
-
What is the formulation of Product M5519, Murashige and Skoog (MS) Basal Medium?
1 answer-
Please see the link below to review the product datasheet, including the full formulation:
https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/product/documents/361/537/m5519pis.pdf
To review additional Murashige and Skoog formulations, please see the link below:
Helpful?
-
-
Product M5519, Murashige and Skoog Basal Medium, is on back order. Can you suggest an alternate?
1 answer-
Product M5524 Murashige and Skoog(M&S) Basal Salt Mixture, is an ideal alternative to M5519, M&S Basal Medium. These formulations are identical with the exception of vitamin components. With the addition of 1 mL of M7150 M&S Vitamin Solution, the composition of each medium is equivalent.
Helpful?
-
-
Can I autoclave Product M5519, Murashige and Skoog Basal Medium?
1 answer-
Yes, this medium is autoclavable.
Helpful?
-
-
once the media is prepared, what conditions should it be stored in, and how long can it be stored?
1 answer-
The prepared solution is quite stable but should be stored refrigerated. Monitor the salt solution for particulates or turbidity. After the addition of agar and subsequent sterilization, poured plates or vessels should also be stored aseptically in the refrigerator until use. The shelf life of the stored plates or vessels is most often limited by less stable compounds added to the medium. The end user would have to determine the stability of these components. While there is no firm shelf life on the prepared medium, contamination, and drying are the most common reasons for degradation. Monitor plates/vessels for contaminants or turbidity. An indication of excessive drying will be the gelled medium pulling away from the sides of the plate or vessel. The medium has lost moisture and may not be suitable for use. Moisture loss can be minimized by storing prepared plates/vessels in a sealed container or sealed bags. Please see the link below to review the product datasheet:
https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/product/documents/361/537/m5519pis.pdfHelpful?
-
-
What is the percentage of sucrose in M5519?
1 answer-
The M5519 does not contain sucrose. This component would have to be added prior to autoclaving. The typical amount is 30 g/L. See the link below to review the product information sheet:
https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/product/documents/361/537/m5519pis.pdfShould sucrose be desired, see product M9274, which is more of a complete formulation containing M&S salts, vitamins, sucrose, and agar. See the link below to review the formulations of the various Murashige & Skoog media:
https://www.sigmaaldrich.com/technical-documents/technical-article/cell-culture-and-cell-culture-analysis/plant-tissue-culture/murashige-skoog#Basal%20Salts%20MixturesHelpful?
-
-
What is the quantity and what is shelf life
1 answer-
The SKU sizes indicated refer to the final volume of media that can be made upon reconstitution of the pre-weighted powder. This powdered media is formulated to contain 4.4 grams of powder per liter of medium. This product does not contain an expiration date or recommended retest date. Products with no expiration date or recommended retest date should be routinely inspected by customers to ensure they perform as expected. These products are also subject to a one year warranty from the date of shipment. For more information you may access the "Product Dating Information" document under "ADDITIONAL USEFUL DOCUMENTS ABOUT OUR PRODUCTS" at the bottom of the Quality Services page with this link: https://www.sigmaaldrich.com/US/en/life-science/quality-and-regulatory-management/quality-services
Helpful?
-
-
Product M5519, Murashige and Skoog Basal Medium, has precipitates; will that affect the growth?
1 answer-
Precipitates are known to occur, with time, in plant tissue culture media. The precipitates have been analyzed. They are composed of small pale yellow-white particles. Analysis of precipitates indicated a predominance of iron, phosphate, and zinc. The probable cause of the precipitates is the inevitable oxidation of ferrous ions to ferric ions and the presence of unchelated ferric ions. When the solubility of ferric phosphate is exceeded precipitation occurs. There are no reports of detrimental effects on growth and development in plant tissue culture due to the precipitates.
Helpful?
-



