Accéder au contenu
Merck
Toutes les photos(1)

Documents

06858

Sigma-Aldrich

Celite® S

filter aid, dried, untreated

Synonyme(s) :

Diatomaceous earth, Diatomaceous silica, Kieselguhr

Se connecterpour consulter vos tarifs contractuels et ceux de votre entreprise/organisme


About This Item

Numéro CAS:
Numéro MDL:
Code UNSPSC :
11101527
ID de substance PubChem :
Nomenclature NACRES :
SB.52

Niveau de qualité

Forme

powder

Qualité

dried
untreated

Composition

Al2O3, 4.1%
CaO, 0.4%
Fe2O3, 1.6%
MgO, 0.2%
Na2O + K2O, 1.4%
P2O5, 0.3%
SiO2, 90.2%
TiO2, 0.2%

Perte

3.2-10.0% loss on ignition, 900°C

pH

~7 (25 °C, 10% in aq. suspension)

Chaîne SMILES 

O=[Si]=O

InChI

1S/O2Si/c1-3-2

Clé InChI

VYPSYNLAJGMNEJ-UHFFFAOYSA-N

Vous recherchez des produits similaires ? Visite Guide de comparaison des produits

Description générale

Celite® S is composed of SiO2 and is also known as diatomite or diatomaceous earth. It is used as a filter aid for rapid filtration in an aqueous solution.

Application

Highly insoluble, inert material for use as a filtration aid.

Informations légales

Celite is a registered trademark of Imerys Minerals California, Inc.

Pictogrammes

Health hazard

Mention d'avertissement

Danger

Mentions de danger

Classification des risques

STOT RE 1 Inhalation

Organes cibles

Lungs

Code de la classe de stockage

6.1C - Combustible acute toxic Cat.3 / toxic compounds or compounds which causing chronic effects

Classe de danger pour l'eau (WGK)

nwg

Point d'éclair (°F)

Not applicable

Point d'éclair (°C)

Not applicable


Certificats d'analyse (COA)

Recherchez un Certificats d'analyse (COA) en saisissant le numéro de lot du produit. Les numéros de lot figurent sur l'étiquette du produit après les mots "Lot" ou "Batch".

Déjà en possession de ce produit ?

Retrouvez la documentation relative aux produits que vous avez récemment achetés dans la Bibliothèque de documents.

Consulter la Bibliothèque de documents

Messaouda Safa et al.
Water science and technology : a journal of the International Association on Water Pollution Research, 65(10), 1729-1737 (2012-05-02)
The adsorption of Cu(2+), Zn(2+), Cd(2+) and Pb(2+) ions from aqueous solution by Algerian raw diatomite was studied. The influences of different sorption parameters such as contact pH solution, contact time and initial metal ions concentration were studied to optimize
Goran G Andrić et al.
Journal of economic entomology, 105(2), 670-678 (2012-05-23)
Insecticidal potential of natural zeolites and diatomaceous earths originating from Serbia against Sitophilus oryzae (L.) and Tribolium castaneum (Herbst) was evaluated. Two natural zeolite formulations (NZ and NZ Modified) were applied to wheat at rates of 0.50, 0.75, and 1.0
James F Meadow et al.
Microbial ecology, 65(1), 171-179 (2012-08-29)
Geothermal influenced soils exert unique physical and chemical limitations on resident microbial communities but have received little attention in microbial ecology research. These environments offer a model system in which to investigate microbial community heterogeneity and a range of soil
Heezoo Kim et al.
Anesthesia and analgesia, 115(2), 244-252 (2012-05-16)
The activated clotting time (ACT) is widely used for monitoring heparin anticoagulation during cardiac surgery. Celite-based ACT values are prolonged when aprotinin is administered. MDCO-2010, a novel serine protease inhibitor, is currently being evaluated as a possible alternative to aprotinin.
Tino Jaschinski et al.
Rapid communications in mass spectrometry : RCM, 27(1), 109-116 (2012-12-15)
Organic matrices are the state-of-the-art ionization mediators in Laser Desorption/Ionization Mass Spectrometry (LDI-MS). Despite improvements in understanding matrix chemistry, interfering matrix-related signals complicate the analysis. Surface-assisted LDI techniques like desorption/ionization on silicon (DIOS) or nanostructure initiator mass spectrometry (NIMS) provide

Notre équipe de scientifiques dispose d'une expérience dans tous les secteurs de la recherche, notamment en sciences de la vie, science des matériaux, synthèse chimique, chromatographie, analyse et dans de nombreux autres domaines..

Contacter notre Service technique