When using polycarbonate bottles, it is recommended to autoclave and/or use radiation for sterilization. Before autoclaving, it is important to thoroughly rinse the products to avoid crazing and spotting caused by detergent residues. The autoclaving cycles should be limited to 20 minutes at 121°C, as repeated autoclaving can lead to a loss of mechanical strength, affecting its performance under high-stress applications such as centrifugation. It is not advisable to expose these vessels to high stresses such as vacuum application or centrifugation. Dishwashers can be used with all resins, except for LLDPE, acrylic, and PS, due to temperature limitations. The maximum recommended use temperature for polycarbonate is 115°C - 138°C. Repeated washing of polycarbonate vessels in the dishwasher can weaken the strength of the bottles. Detailed information and recommendations on autoclaving and a table of resin properties with recommended sterilization methods can be found in our Nalgene technical guide, specifically on page 16 and 19.
TMO383423-42
Nalgene® Certified Clean Biotainer(TM) Carboys
polycarbonate, volume 20 L, case of 3 ea
Synonym(e):
biotainer carboy, certified nalgene carboy, sterile carboy
Größe auswählen
796,00 €
Größe auswählen
About This Item
796,00 €
Empfohlene Produkte
Materialien
polycarbonate
Verpackung
case of 3 ea
Hersteller/Markenname
Nalgene 383423-42
Volumen
20 L
20000 mL
Suchen Sie nach ähnlichen Produkten? Aufrufen Leitfaden zum Produktvergleich
Allgemeine Beschreibung
Leistungsmerkmale und Vorteile
- Provided sterile and ready-to-use; including certified clean products, which meet USP<788> standards and endotoxins below 0.5 EU/mL
- Certified clean products include triple layer packaging, with two heat-sealed layers to facilitate ease of entry into cleanrooms
- Sterility Assurance Level of 10-6 inside the bottle/closure
- Robust, PC can be used from -100°C to 100°C, allowing for both heated mixing and frozen storage or shipment. Must be tested in actual use conditions as results may vary depending upon application.
- Inspection procedures throughout manufacturing include leak testing, dimensional testing, visual inspection for particulates and release testing to ensure the product meets all specifications.
- All container/closure systems are certified leakproof** to protect valuable contents
Rechtliche Hinweise
Hier finden Sie alle aktuellen Versionen:
Analysenzertifikate (COA)
It looks like we've run into a problem, but you can still download Certificates of Analysis from our Dokumente section.
Wenn Sie Hilfe benötigen, wenden Sie sich bitte an Kundensupport
Besitzen Sie dieses Produkt bereits?
In der Dokumentenbibliothek finden Sie die Dokumentation zu den Produkten, die Sie kürzlich erworben haben.
-
Can you provide information on the sterilization method for product TMO383423-42?
1 Antwort-
Hilfreich?
-
Aktive Filter
Unser Team von Wissenschaftlern verfügt über Erfahrung in allen Forschungsbereichen einschließlich Life Science, Materialwissenschaften, chemischer Synthese, Chromatographie, Analytik und vielen mehr..
Setzen Sie sich mit dem technischen Dienst in Verbindung.
