Direkt zum Inhalt
Merck

28-1245

Sigma-Aldrich

Silberdiethyldithiocarbamat

JIS special grade, ≥98.0%, storage temp.:2-8°C

Synonym(e):

DETC, Diethyldithiocarbaminsäure Silbersalz

Anmeldenzur Ansicht organisationsspezifischer und vertraglich vereinbarter Preise


About This Item

Lineare Formel:
(C2H5)2NCSSAg
CAS-Nummer:
Molekulargewicht:
256.14
Beilstein:
3718150
MDL-Nummer:
UNSPSC-Code:
12352300
PubChem Substanz-ID:
Preise und Verfügbarkeit sind derzeit nicht verfügbar.

Qualität

JIS special grade

Assay

≥98.0%

Form

solid

Verfügbarkeit

available only in Japan

mp (Schmelzpunkt)

172-175 °C (lit.)

Lagertemp.

2-8°C

SMILES String

CCN(CC)C(=S)S[Ag]

InChI

1S/C5H11NS2.Ag/c1-3-6(4-2)5(7)8;/h3-4H2,1-2H3,(H,7,8);/q;+1/p-1

InChIKey

NSVHDIYWJVLAGH-UHFFFAOYSA-M

Suchen Sie nach ähnlichen Produkten? Aufrufen Leitfaden zum Produktvergleich

Anwendung

Spin trap zur Benutzung zusammen mit Fe2+ für den Nachweis von NO in Hirn, Niere, Leber und anderen Gewebearten. Simultane Direktmessung von NO* und pO2 wurde beschrieben. Ein Kupfer-Chelatbildner, der zum Quantifizieren von Kupfer in biologischem Material mittels ESR verwendet wird. Ein Inhibitor für Superoxiddismutase, Ascorbatoxidase und weitere Enzyme.
Wird auch benutzt für die kolorimetrische Bestimmung für kleine Mengen Arsen

Biochem./physiol. Wirkung

Inhibiert die Induktion von Makrophagen-NO-Synthase.

Lagerklassenschlüssel

11 - Combustible Solids

WGK

WGK 3

Flammpunkt (°F)

Not applicable

Flammpunkt (°C)

Not applicable


Hier finden Sie alle aktuellen Versionen:

Analysenzertifikate (COA)

Lot/Batch Number

Die passende Version wird nicht angezeigt?

Wenn Sie eine bestimmte Version benötigen, können Sie anhand der Lot- oder Chargennummer nach einem spezifischen Zertifikat suchen.

Besitzen Sie dieses Produkt bereits?

In der Dokumentenbibliothek finden Sie die Dokumentation zu den Produkten, die Sie kürzlich erworben haben.

Die Dokumentenbibliothek aufrufen

Sanjoy K Maji et al.
Journal of environmental science and health. Part A, Toxic/hazardous substances & environmental engineering, 42(7), 989-996 (2007-06-15)
The efficiency of a locally available laterite soil in removing both arsenite and arsenate from aqueous medium by adsorption was evaluated. It was observed that in batch experiment conducted at 0.5 mg/L initial concentration of arsenic, laterite soil could remove
D Brune et al.
Swedish dental journal, 4(3), 125-128 (1980-01-01)
The reliability of the method for analysis for arsenic in dental cements according to the international standard ISO 2590 has been reinvestigated using nuclear tracer techniques and intercomparison of results obtained for the arsenic content of various cements by means
Seth H Frisbie et al.
Environmental health perspectives, 113(9), 1196-1204 (2005-09-06)
All of Bangladesh's approximately 10 million drinking-water tube wells must be periodically tested for arsenic. The magnitude of this task and the limited resources of Bangladesh have led to the use of low-cost, semiquantitative field kits that measure As to
Yabing Xiao et al.
Water environment research : a research publication of the Water Environment Federation, 79(9), 1015-1022 (2007-10-04)
A novel method of preconcentration of trace arsenite and arsenate by using titanium dioxide nanoparticles as adsorbent was described. The concentrations of preconcentrated arsenite and arsenate were determined by a silver diethyldithiocarbamate spectrophotometric method without desorption. Batch adsorption experiments were
Mohammad Hossein Arbab-Zavar et al.
Analytical sciences : the international journal of the Japan Society for Analytical Chemistry, 26(1), 107-110 (2010-01-13)
A simple method was developed for speciation and spectrophotometric determination of inorganic As(III) and As(V) using an electrochemical hydride generation technique. For speciation of As(III) and As(V), a graphite rod was used as cathode to reduce As(III) to AsH(3), the

Fragen

Bewertungen

Kein Beurteilungswert

Aktive Filter

Unser Team von Wissenschaftlern verfügt über Erfahrung in allen Forschungsbereichen einschließlich Life Science, Materialwissenschaften, chemischer Synthese, Chromatographie, Analytik und vielen mehr..

Setzen Sie sich mit dem technischen Dienst in Verbindung.