PCC030C30L

Pellicon^® Capsule with Ultracel^® Membrane

30 kDa, C Screen, 3 m² manifold with AseptiQuik^® L connectors

• UNSPSC-Code: 41104903

Eigenschaften

• Materialien: EPDM rubber seal; PPO/PS blend (Core); PPO/PS blend housing; TPE seal; composite regenerated cellulose (CRC) membrane; epoxy adhesive; polyester screen; polypropylene screen; polyurethane adhesive
• Qualitätsniveau: 400
• Sterilität: sterile; γ-irradiated
• Produktlinie: Pellicon^®
• Lagerbedingungen: room temperature (15-30°C)
• Parameter: 4-8 L/min-m² flow rate; 50 psi pressure (3.5 bar) at 4-30 °C (Forward Transmembrane Pressure (TMP)); 60 psi max. pressure (4.1 bar) at 4-30 °C (Maximum Inlet Pressure)
• Methode(n): ultrafiltration: suitable
• Höhe: 46.9 cm (18.5 in.)
• Länge: 42.0 cm (16.5 in.)
• Breite: 48.2 cm (19.0 in.)
• Filtrationsfläche: 3 m²
• Vesikelgröße: , Type C screen (coarse screen)
• Volumen: 1128 mL , in feed channel; 1547 mL , in permeate channel
• Verunreinigungen: ≤5 ppm TOC ( in retentate effluent, after a WFI flush of 20 L/m²)
• Matrix: Ultracel^®
• Porengröße: 30 kDa
• pH-Bereich: 2-13
• Fitting: inlet/outlet connection (Feed: AseptiQuik^® L Connector); inlet/outlet connection (Permeate: AseptiQuik^® L Connector); inlet/outlet connection (Retentate: AseptiQuik^® L Connector)

Beschreibung

Allgemeine Beschreibung

The Pellicon^® Capsule is the first of its kind -- a true single-use TFF device that comes ready to process in minutes. Self-contained, it employs an easy-to-use, holderless format and is supplied sterilized by irradiation.

Anwendung

Concentration, Diafiltration, Buffer exchange, Protein purification

Leistungsmerkmale und Vorteile

Plug ′n play, holderless design - easy to install, safe to remove
Gamma Sterilized and preseravtive-free - ready to process in minutes
True single-use, self-contained capusle - fast, safe, and flexible batch turnaround
Proven Ultracel^® membrane and C screen - high recovery, superior mass transfer, solvent resistance
Pellicon^® TFF proven performance - true linear scalability within Pellicon^® TFF families

Verpackung

The manifold assembly is inserted into a polyethylene foam frame and then double bagged and vacuum sealed. The double-bagged assembly is placed within a second foam frame and individually boxed (qty 1 per box). Packaged assemblies are palletized.

Sonstige Hinweise

The Emprove^® Program complements the product portfolio through
Comprehensive documentation to support qualification, risk assessment and process optimization needs.
Consolidation of product specific testing, quality and regulatory information to simplify compliance requirements.
Convenient 24/7 access to up-to-date product information.

Rechtliche Hinweise

AseptiQuik is a registered trademark of Colder Products Company

Emprove is a registered trademark of Merck KGaA, Darmstadt, Germany

Pellicon is a registered trademark of Merck KGaA, Darmstadt, Germany

ULTRACEL is a registered trademark of Merck KGaA, Darmstadt, Germany