TRD3D0063

Caementum architectural 3D printing filament

concrete effect, diam. 1.75 mm

• UNSPSC-Code: 12352203
• NACRES: NA.23

Eigenschaften

• Grünere Alternativprodukt-Eigenschaften: Waste Prevention; Design for Energy Efficiency; Learn more about the Principles of Green Chemistry.
• sustainability: Greener Alternative Product
• Durchmesser: 1.75 mm
• Gewicht: 750 geach
• Grünere Alternativprodukt-Kategorie: Enabling,

Beschreibung

Allgemeine Beschreibung

Caementum architectural 3D printing filament

• Developed specifically for architecture, design and archeological fields.
• Polymers are mixed with special powders to realize architectural objects with ease.
• Concrete finish your objects with exceptional tactile feeling.
• Polish your objects with fine sandpaper and water. No more support-removing problems.

Material Properties

• Water absorption: 0.2%
• Tensile modulus: 2500 GPa
• Vicat softening temperature: 102 °C
• Charpy impact at 23°C: 8 ft·lb/in2
• Charpy impact at -30°C: 3 ft·lb/in2
• MFR: 4g/10 min

We are committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Greener Chemistry. This product belongs to Enabling category of greener alternatives thus aligns with " Waste prevention" and "Design for energy efficency". Architectural 3D printing allows for design and print of more complex designs with little or no wastage. It is environmentally friendly.Click here for more information.

Anwendung

Caementum 3D Printing Parameters

• Extruder (nozzle) temperature: 230 +/- 10 °C
• Bed temperature: 100 +/- 10 °C
• Print speed: 60-70 mm/s
• Fan: 0-20 %
• Minimum nozzle diameter: 0.35 mm
• Plate materials: blue tape, kapton tape, etc.

This product can be used in material extrusion 3D printing technique.

Sicherheitshinweise

• Lagerklassenschlüssel: 11 - Combustible Solids
• WGK: WGK 3
• Flammpunkt (°F): Not applicable
• Flammpunkt (°C): Not applicable