The dye is loaded inside the nanoparticles and is not covalently attached to the surface. The type of red fluorescent dye used in the manufacture of this product is not disclosed. The excitation wavelength of the dye is approximately 644 nm with an associated emission of approximately 665 nm.
LGFR100
Red Fluorescent PLGA nanoparticles
100 nm average diameter
Anmeldenzur Ansicht organisationsspezifischer und vertraglich vereinbarter Preise
Alle Fotos(1)
Größe auswählen
Ansicht ändern
50 MG
487,00 €
About This Item
UNSPSC-Code:
12162002
NACRES:
NA.23
Empfohlene Produkte
Beschreibung
Excitation/Emission: 644/665 nm
Form
pellets
Durchschnittlicher Durchmesser
100 nm
Suchen Sie nach ähnlichen Produkten? Aufrufen Leitfaden zum Produktvergleich
Verwandte Kategorien
Allgemeine Beschreibung
Particles made of poly(D,L-lactide-co-glycolide) L/G ratio of 50/50, inherent viscosity of ~0.45 dL/g.To re-constitute:
- Warm to ambient temperature
- Add DI water or buffer to achieve desired concentration
- Vortex and sonicate for 5 minutes to ensure particles are well suspended
Anwendung
Fluorescent PLGA particles for imaging and cell tracking in drug discovery. Particles can be used for fluorscent assays and drug delivery.
Rechtliche Hinweise
Product of Phosphorex, Inc.Degradex(RM) is a product of Phosphorex, Inc.
Lagerklassenschlüssel
11 - Combustible Solids
WGK
WGK 3
Flammpunkt (°F)
Not applicable
Flammpunkt (°C)
Not applicable
Hier finden Sie alle aktuellen Versionen:
Analysenzertifikate (COA)
Lot/Batch Number
It looks like we've run into a problem, but you can still download Certificates of Analysis from our Dokumente section.
Wenn Sie Hilfe benötigen, wenden Sie sich bitte an Kundensupport
Besitzen Sie dieses Produkt bereits?
In der Dokumentenbibliothek finden Sie die Dokumentation zu den Produkten, die Sie kürzlich erworben haben.
Artikel
Polymeric antioxidants show promise in drug delivery with superior bioavailability and antioxidant potential.
-
is the cy5 conjugated plga?? or cy5 encapsulated plga??
1 Antwort-
Hilfreich?
-
-
Hello, are these nanoparticles fucnctionalized with carboxylic acids groups on the surface?
1 Antwort-
These nanoparticles have not been functionalized beyond a red fluorescent dye.
Hilfreich?
-
-
Can this product be resuspended in water? What is its stability lifetime ?
1 Antwort-
Product LGFR100 is supplied as lyophilized powder and should be stored at -20°C in a dry environment protected from light. Product LGFR100 can be resuspended in water.
To re-constitute:
remove the product from freezer
wait until temperature rises to ambient
add DI water or buffer to the container
vortex and sonicate for 5 minutes to ensure the microspheres are well suspendedIt is strongly recommended to use the product immediately upon resuspension because the particles begin to degrade as soon as they are introduced into an aqueous solution. If storage of particles in suspension is required, it is recommended to store at 2-8 °C to slow the degradation.
Hilfreich?
-
Aktive Filter
Unser Team von Wissenschaftlern verfügt über Erfahrung in allen Forschungsbereichen einschließlich Life Science, Materialwissenschaften, chemischer Synthese, Chromatographie, Analytik und vielen mehr..
Setzen Sie sich mit dem technischen Dienst in Verbindung.
