Direkt zum Inhalt
Merck
Alle Fotos(1)

Dokumente

348813

Sigma-Aldrich

Titan

foil, thickness 0.1 mm, 99.99% trace metals basis

Anmeldenzur Ansicht organisationsspezifischer und vertraglich vereinbarter Preise
Alle Fotos(1)

About This Item

Empirische Formel (Hill-System):
Ti
CAS-Nummer:
7440-32-6
Molekulargewicht:
47.87
EG-Nummer:
231-142-3
MDL-Nummer:
MFCD00011264
UNSPSC-Code:
12352300
PubChem Substanz-ID:
24861622
NACRES:
NA.23

Qualitätsniveau

100

Assay

99.99% trace metals basis

Form

foil

Selbstzündungstemp.

860 °F

Widerstandsfähigkeit

42.0 μΩ-cm, 20°C

Dicke

0.1 mm

bp

3287 °C (lit.)

mp (Schmelzpunkt)

1660 °C (lit.)

Dichte

4.5 g/mL at 25 °C (lit.)

Anwendung(en)

battery manufacturing

SMILES String

[Ti]

InChI

1S/Ti

InChIKey

RTAQQCXQSZGOHL-UHFFFAOYSA-N

Allgemeine Beschreibung

Ti has low thermal and electrical conductivity. It is highly corrosion-resistant and has a high strength to weight ratio. A few angstroms thick layer of titania on the surface of Ti products makes its corrosion resistant.5 Ti foils could be employed as a substrate to grow arrays of hematite nanorods by hydrothermal method. A study reports pressure less sintering of SiC pieces and single crystals to Ti foils at 1500oC.Ti foil may be applied as an interlayer, diffusion bonded during the self joining of Si3N4. Si3N4/Ti-foil/Si3N4.

Menge

280 mg = 25 × 25 mm; 1.1 g = 50 × 50 mm

Lagerklassenschlüssel

11 - Combustible Solids

WGK

nwg

Flammpunkt (°F)

Not applicable

Flammpunkt (°C)

Not applicable

Persönliche Schutzausrüstung

Eyeshields, Gloves, type N95 (US)

Analysenzertifikate (COA)

Suchen Sie nach Analysenzertifikate (COA), indem Sie die Lot-/Chargennummer des Produkts eingeben. Lot- und Chargennummern sind auf dem Produktetikett hinter den Wörtern ‘Lot’ oder ‘Batch’ (Lot oder Charge) zu finden.

Besitzen Sie dieses Produkt bereits?

In der Dokumentenbibliothek finden Sie die Dokumentation zu den Produkten, die Sie kürzlich erworben haben.

Die Dokumentenbibliothek aufrufen

Kunden haben sich ebenfalls angesehen

Slide 1 of 8

1 of 8

Titan foil, thickness 2.0 mm, 99.7% trace metals basis

Sigma-Aldrich

369489

Titan

Titan foil, thickness 0.004 mm, size 50 × 50 mm, purity 99.6+%

GF00253606

Titan

Titan foil, thickness 0.01 mm, 6 mm diameter, high purity 99.99+%

GF00667087

Titan

Titan IRMM®, certified reference material, 0.1 mm foil

IRMM531A

Titan

Titan wire, diam. 0.81 mm, 99.7% trace metals basis

Sigma-Aldrich

267902

Titan

Titan sheet, thickness 5.0 mm, size 20 × 20 mm, tolerance 0.2

GF84634645

Titan

Titan wire, diam. 0.25 mm, 99.7% trace metals basis

Sigma-Aldrich

460400

Titan

Titan 5-10 mm, ≥99.99% trace metals basis (purity exclusive of Na and K content)

Sigma-Aldrich

305812

Titan

Joining of silicon nitride with a titanium foil interlayer
Lemus J and Drew RAL
Materials Science & Engineering. A, Structural Materials : Properties, Microstructure and Processing, 352, 169-178 (2003)
Bonding mechanism between silicon carbide and thin foils of reactive metals
Morozumi S, et al.
J. Mater. Sci., 20(11), 3976-3982 (1985)
Large-Scale Porous Hematite Nanorod Arrays: Direct Growth on Titanium Foil and Reversible Lithium Storage.
Song Y et al.
The Journal of Physical Chemistry C, 114(49), 21158-21164 (2010)
A Kurbad et al.
International journal of computerized dentistry, 16(2), 125-141 (2013-08-13)
This article presents two novel options for lithium-disilicate restorations supported by single-tooth implants. By using a Ti-Base connector, hybrid abutments and hybrid abutment crowns can be fabricated for different implant systems. The latter option in particular is an interesting new
Jinho Shin et al.
Journal of nanoscience and nanotechnology, 13(8), 5807-5810 (2013-07-26)
In this study, hydroxyapatite (HA) was coated on anodized titanium (Ti) surfaces through radio frequency magnetron sputtering in order to improve biological response of the titanium surface. All the samples were blasted with resorbable blasting media (RBM). RBM-blasted Ti surface
Alle zugehörigen Dokumente anzeigen

Artikel

Combinatorial Materials Science for Energy Apps

Combinatorial Materials Science identifies breakthrough materials through systematic exploration, aiding material discovery.

Biomedical Implant Devices Fabricated from Low Young’s Modulus Titanium Alloys Demonstrating High Mechanical Biocompatibility

Biomedical implants are essentially foreign substances within the human body that must survive many years’ exposure to demanding mechanical and physiological conditions. Despite these challenges, metal implants have been widely used to substitute for or rebuild hard tissues such as bones and teeth.

Unser Team von Wissenschaftlern verfügt über Erfahrung in allen Forschungsbereichen einschließlich Life Science, Materialwissenschaften, chemischer Synthese, Chromatographie, Analytik und vielen mehr..

Setzen Sie sich mit dem technischen Dienst in Verbindung.