MPGL04GK2

Millipak^® 40 Gamma Gold Capsule Media: Sterile Durapore^® 0.22 µm

Chemistry: Hydrophilic Polyvinylidene Fluoride (PVDF) Inlet: 1/4 in. NPTM Outlet: 1/4 in. Stepped Hose Barb with Bell

• Synonym(s): Millipak^® 40 Gamma Gold Filter, Millipak^® Gold Filter
• UNSPSC Code: 41104212
• NACRES: JA.14
• eCl@ss: 33050190

Properties

• Product Name: Millipak^® 40 Gamma Gold Capsule Media: Sterile Durapore^® 0.22 µm, Chemistry: Hydrophilic Polyvinylidene Fluoride (PVDF) Inlet: 1/4 in. NPTM Outlet: 1/4 in. Stepped Hose Barb with Bell
• material: PVDF membrane
• Quality Segment: 300
• description: Sterile 0.22 μm membrane filter to remove particulates and bacteria at the point of dispense. For Milli-Q^® Advantage A10/Academic/Biocel/Element/Synthesis/Plus/Gradient, Alpha-Q and Milli-DI^® systems.
• sterility: sterile
• product line: EMPROVE^® Filter
• feature: hydrophilic
• packaging: pkg of 2 units
• manufacturer/tradename: Millipak^®
• parameter: 0.35 bar max. differential pressure at 123 °C (Forward), 0.7 bar max. differential pressure at 25 °C (Reverse), 1.7 bar max. differential pressure at 80 °C (Forward), 4.1 bar max. differential pressure at 25 °C (Forward), 5.2 bar max. inlet pressure at 25 °C
• inlet connection diam.: 1/4 in.
• outlet connection diam.: 1/4 in.
• impurities: <0.5 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
• gravimetric extractables: ≤1.5 mg/device
• matrix: Durapore^®
• pore size: 0.22 μm pore size
• fitting: male NPT inlet connection, outlet stepped hose barb (with bell)
• compatibility: for use with Alpha-Q, for use with Milli-DI^®, for use with Milli-Q^® Academic, for use with Milli-Q^® Advantage A10, for use with Milli-Q^® Biocel, for use with Milli-Q^® Direct, for use with Milli-Q^® Element, for use with Milli-Q^® Gradient, for use with Milli-Q^® Plus, for use with Milli-Q^® Reference, for use with Milli-Q^® Synthesis
• shipped in: ambient

Description

General description

Millipak^® membrane products are designed for routine filtration applications in the laboratory. Millipak^® filters are best-in-class, proven products, used in lab water purification systems to remove particulates and bacteria to benefit the stringent requirements of scientific applications.

Application

Removes bacteria and particulates in ultrapure water, making it suitable for techniques used in the laboratory where bacterial control is crucial (cell culture, microbiology media preparation, etc.).

Features and Benefits

• Millipak^® membrane filters are made with Durapore^® PVDF membranes to provide high flow rates and throughputs, low extractable and broad chemical compatibility.
• Gamma-irradiated for additional bacteria control.
• The membrane is supported by a rigid plastic disc with channels that ensures high water flow and resistance to pressure variations without the risk of membrane rupture.
• Millipak^® membrane filters use the unique, clean stacked disc design, allowing minimal hold-up volume and particle shedding.
• Connects to the outlet of the water delivery point, such as the PODs of Milli-Q^® water purification systems.The protective bell protects against intrusion of airborne bacteria contamination during dispensing.
• The protective bell protects against intrusion of airborne bacteria contamination during dispensing.
• Care-free maintenance: the filter is easily fitted and replaced.
• Device configuration: Gamma Gold Capsule.
• Sterile unit.
• Delivered hermetically sealed, with its Certificate of Quality.

Preparation Note

This product was manufactured with a Durapore^® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).

Analysis Note

Bacterial Retention
Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM^® F838 methodology.

Gravimetric Extractables: using sterilized device after a 200 mL flush and 24 hours in water at controlled room temperature

Other Notes

Directions for Use

• Organism Retention: Microorganisms
• Mode of Action: Filtering
• Application: General laboratory analysis
• Intended Use: Water purification
• Instructions for Use: This item provides water filtered through 0.22 μm sterilizing-grade membranes. Refer to system equipment user guide section "Using the System" (available on USB key in the system box).
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Legal Information

ASTM is a registered trademark of American Society for Testing and Materials

Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany

Emprove is a registered trademark of Merck KGaA, Darmstadt, Germany

MILLI-DI is a registered trademark of Merck KGaA, Darmstadt, Germany

MILLIPAK is a registered trademark of Merck KGaA, Darmstadt, Germany

Milli-Q is a registered trademark of Merck KGaA, Darmstadt, Germany