MPGL02GH2
Millipak® 20 Gamma Gold Capsule Media: Sterile Durapore® 0.22 µm
Chemistry: Hydrophilic Polyvinylidene Fluoride (PVDF) Inlet: 1/4 in. Hose Barb Outlet: 1/4 in. Hose Barb with Bell
Synonym(s):
Sterile Millipak-20 Filter Unit 0.22 μm 1/4 in. HB/HB w/bell, Durapore® 0.22 µm, Millipak® Capsule
Select a Size
Inquire
This item is not able to be purchased as a guest user. For further information, please contact us at +420 225 296 100or
.About This Item
Skip To
Product Name
Millipak® 20 Gamma Gold Capsule Media: Sterile Durapore® 0.22 µm, Chemistry: Hydrophilic Polyvinylidene Fluoride (PVDF) Inlet: 1/4 in. Hose Barb Outlet: 1/4 in. Hose Barb with Bell
material
PVDF membrane, PVDF vent cap, polycarbonate , polycarbonate support
product line
Millipak®
feature
hydrophilic
manufacturer/tradename
Millipak®
parameter
0.35 bar max. differential pressure (5 psid) at 123 °C (Forward), 0.7 bar max. differential pressure (10 psid) at 25 °C (Reverse), 1.5 L/min flow rate at 1.75 bar (ΔP), 1.7 bar max. differential pressure (25 psid) at 80 °C (Forward), 10 L process volume, 25 °C max. temp., 4.1 bar max. differential pressure (60 psid) at 25 °C (Forward), 5.2 bar max. inlet pressure (75 psi) at 25 °C
technique(s)
sterile filtration: suitable
filtration area
100 cm2
inlet connection diam.
1/4 in.
outlet connection diam.
1/4 in.
impurities
≤0.5 EU/mL (LAL test, Aqueous extraction), <0.5 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
gravimetric extractables
≤1 mg/device
matrix
Durapore®
pore size
0.22 μm
bubble point
≥3450 mbar (50 psig), air with water at 23 °C
fitting
inlet hose barb, outlet hose barb (with bell), (6 mm (1/4 in.) Hose Barb Inlet and Outlet with filling bell)
shipped in
ambient
Quality Level
sterility
irradiated, sterile
Looking for similar products? Visit Product Comparison Guide
1 of 4
This Item | |||
|---|---|---|---|
| pore size 0.22 μm | pore size 0.1 μm | pore size 0.45 μm | pore size 0.45 μm |
| product line Millipak® | product line Millipak® 20 | product line Millipak® 20 | product line - |
| filtration area 100 cm2 | filtration area 100 cm2 | filtration area 100 cm2 | filtration area - |
| technique(s) sterile filtration: suitable | technique(s) sterile filtration: suitable | technique(s) bioburden reduction: suitable | technique(s) - |
| material PVDF membrane, polycarbonate , PVDF vent cap, polycarbonate support | material PVDF membrane, PVDF vent cap, polycarbonate , polycarbonate support | material PVDF membrane, PVDF vent cap, polycarbonate , polycarbonate support | material - |
| matrix Durapore® | matrix Durapore® | matrix Durapore® | matrix Durapore® |
General description
Analysis Note
Other Notes
- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: BioProcessing
- Intended Use: Reduction or removal of microorganism/bioburden
- Instructions for Use: Please refer Wetting Instructions for Filter Units with Durapore® Membrane user guide
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal Information
Stay compliant with GMP using the Emprove® Program
Accelerate qualification, maintain compliance, and save time with Emprove® Dossiers.
Note: you will be brought to EmproveSuite.com. Your username and password are separate from SigmaAldrich.com and may differ.
Register for free and access Emprove® Dossiers within minutes. Upgrade your subscription plan to unlock advanced and customized content in the Emprove® Suite
Not finding what you are looking for? Visit the Emprove® Program Help page.
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.
Articles
Key aspects of single-use assembly qualification including quality by design (QbD), quality risk management (QRM) and operator handling and training.
Before adoption of single-use technologies in biomanufacturing, manufacturers must assess the risk to the drug product from potential leachables. This article highlights a general approach based on the United States Pharmacopeia (USP).
Active Filters
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service