1.52003
Chromolith® RP-18 endcapped (monolithic) HPLC Columns
L × I.D. 25 mm x 3 mm HPLC Column
Synonym(s):
Chromolith® Flash RP-18 endcapped 25-3 HPLC column
Select a Size
| Size/SKU | Availability | Price |
|---|---|---|
1 unit | Please contact Customer Service for Availability | CZK 16,000.00 CZK 12,000.00 |
About This Item
CZK 12,000.00
List PriceCZK 16,000.00Save 25%Product Name
Chromolith® RP-18 endcapped, L × I.D. 25 mm x 3 mm HPLC column
material
PEEK column
Quality Segment
agency
suitable for USP L1
product line
Chromolith®
feature
endcapped
packaging
1 ea of
extent of labeling
18% Carbon loading
parameter
200 bar pressure, 45 °C max. temp.
technique(s)
HPLC: suitable, LC/MS: suitable, mass spectrometry (MS): suitable (High)
column L × I.D.
2.5 cm × 3 mm
matrix
monolithic silica
matrix active group
C18 (RP18), C18 bonding phase
pore size
13 nm mesoporosity, 2 μm macroporosity
operating pH range
2-7.5
separation technique
reversed phase
storage temp.
no temp limit
General description
Chromolith® Flash RP-18 endcapped 25-3 columns have macropores with 2 μm diameter, giving a column efficiency exceeding 80,000 plates/meter. The mesopores are 13 nm (130 Å), the surface modification is octadecylsilane with full end-capping. Chromolith® Flash RP-18 endcapped 25-3 columns fall under the USP L1 Classification. The column efficiency is comparable to a 5 μm particle size fully porous particulate column. Chromolith® Flash RP-18 endcapped 25-3 columns are perfectly suitable for LC-MS applications.
The column dimension of 25 mm length and 3 mm I.D. is the best choice for rapid separations on any HPLC and UHPLC System.
The revolutionary, monolithic silica with its unique combination of macropores and mesopores enables:
—Rapid separations at very low column back-pressure
—High matrix tolerance, allowing time and cost savings with simplified workflows
—Cost-savings due to extended column lifetimes
—Connection of columns, flow gradients and the use of mobile phases with higher viscosity
The recommended Guard-columns are:
Chromolith® RP-18 endcapped 5-3 guard cartridges (3 pieces) [1.52005] with the Chromolith® Guard Cartridge Holder 5 mm x 3 mm [1.52004]
Holder and guard cartridges are also available as Guard cartridge set [1.52008]
The Chromolith® column coupler can be used to significantly increase the separation efficiency of Chromolith® columns by coupling several columns in series (up to 100,000 plates/per column). [1.51467]
Learn more:
Brochure: Race through your Separations on Any System. Chromolith® Monolithic Silica HPLC Columns
All Supelco HPLC Columns, including monolithic Chromolith® columns, are fully compatible to all HPLC and UHPLC Instruments.
Supelco HPLC Products: The Best Choice for Any LC Instrument
Analysis Note
Pressure: ≤ 10 bar
Performance (anthracene)
Theoretical Plates (N/m) (Anthracene): ≥ 80000
Capacity factor (Anthracene): 3.3 - 4.3
Tailing (USP): 0.90 - 1.55 %
Legal Information
1 of 1
This Item | |||
|---|---|---|---|
| separation technique reversed phase | separation technique reversed phase | separation technique reversed phase | separation technique reversed phase |
| matrix active group C18 bonding phase | matrix active group C18 bonding phase | matrix active group C18 bonding phase | matrix active group C18 bonding phase |
| pore size 13 nm mesoporosity, 2 μm macroporosity | pore size 13 nm mesoporosity, 2 μm macroporosity | pore size 1.5 μm macroporosity, 13 nm mesoporosity | pore size 13 nm mesoporosity, 2 μm macroporosity |
| technique(s) HPLC: suitable, mass spectrometry (MS): suitable (High), LC/MS: suitable | technique(s) HPLC: suitable, LC/MS: suitable, mass spectrometry (MS): suitable (High) | technique(s) LC/MS: suitable, UHPLC-MS: suitable, UHPLC: suitable, mass spectrometry (MS): suitable (High) | technique(s) HPLC: suitable, LC/MS: suitable, mass spectrometry (MS): suitable (High) |
| matrix monolithic silica | matrix monolithic silica | matrix monolithic silica | matrix monolithic silica |
| agency suitable for USP L1 | agency suitable for USP L1 | agency suitable for USP L1 | agency suitable for USP L1 |
Still not finding the right product?
Explore all of our products under Chromolith® RP-18 endcapped
Storage Class
11 - Combustible Solids
Certificates of Analysis (COA)
Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.