PSVVAG041

Prostak^™ MF Module

pore size 0.1 μm

• Synonyma: Prostak^™ MF Module 0.1μm 4 stack 0.33 m², Prostak^™ MF Module
• eCl@ss: 32031623
• UNSPSC Code: 23151806

Vlastnosti

• Název produktu: Prostak^™ MF Module Media: Durapore^® 0.1 µm, Chemistry: Hydrophilic Polyvinylidene Fluoride (PVDF) Device Size: 4 ft²
• Quality Segment: 400
• material: PVDF , silicone gasket
• feature: hydrophilic
• manufacturer/tradename: Prostak^™
• parameter: 2.1 bar max. transmembrane pressure (30 psi) at 50-80 °C, 4.1 bar max. inlet pressure (60 psi) at 50-80 °C, 4.1 bar max. transmembrane pressure (60 psi) at 50 °C, 5.5 bar max. inlet pressure (80 psi) at 50 °C
• technique(s): tangential flow filtration (TFF): suitable
• dilution: (concentration and clarification)
• H: 5.6 cm (2.2 in.)
• L: 38.9 cm (15.3 in.)
• W: 19.8 cm (7.8 in.)
• device size: , 4 stack
• filtration area: 0.33 m²
• membrane nominal area: 0.33 m²
• weight: 2.1 kg (4.7 lb)
• matrix: Durapore^®
• pore size: 0.1 μm nominal pore size, 0.1 μm pore size
• pH: 1-11(short duration), 2-10(continuous)

Popis

General description

Prostak^™ MF Module are a tangential flow filtration device in a stacked plate configuration with Type V screen open feed channel. A microporous membrane, Durapore^® polyvinylidene fluoride (PVDF), is bonded on both sides of each plate. The plates are then stacked in parallel forming stacks.

This Prostak^™ microfiltration open-channel module features a Pore Size of 0.1 μm and a filtration area of 0.33 m². PSVVAG041 is available in a 4 stack, making it applicable for bench-top, pilot, and production scale systems.

The modules can be integrity tested and steam sterilized for 20 cycles.

Prostak^™ MF modules must be used with a support holder, which controls deflection and provides sanitary fittings for connection to external piping. Sanitary gaskets supplied with the module provide a leak-free connection between the module(s) and the holder.

Application

Typical Applications
Prostak^™ microfiltration is used for separations where viscosity and suspended solids levels of the feed stream require an open feed channel. They are typically used in perfusion applications or in the clarification/harvest of:

• Mammalian, bacterial and mycelial cell suspensions
• Emulsions and colloidal suspension
• Viruses, proteins and other bio-organic macromolecular solutions
• Polysaccharides and other high viscosity solutions
• Yeast, algae, and other high solids suspensions
• Protein precipitate
• Vaccines

Features and Benefits

Type V screen open feed channel

Other Notes

Prefiltration Rquirements: 150 µm

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Legal Information

Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany

Prostak is a trademark of Merck KGaA, Darmstadt, Germany