D00271S01

Clarigard^® Cartridge Filter

pore size 0.2 μm, cartridge nominal length 10 in. (25 cm), Code 7 (2-226; O-rings w/locking-tabs)

• Synonyma: Clarigard Cartridge Filter 10 in. 0.2 μm Code 7 Silicone
• eCl@ss: 32031690
• UNSPSC Code: 23151806

Vlastnosti

• Quality Level: 400
• material: polypropylene , silicone seal
• feature: hydrophilic
• manufacturer/tradename: Clarigard^®
• parameter: 4.8 bar max. differential pressure (70 psid) at 25 °C, 4.8 bar max. inlet pressure (70 psi) at 25 °C
• cartridge nominal length: 10 in. (25 cm)
• diam.: 7.0 cm (2.75 in.)
• impurities: ≤0.25 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
• gravimetric extractables: ≤10 mg
• pore size: 0.2 μm nominal pore size, 0.2 μm pore size
• input: sample type liquid
• cartridge code: Code 7 (2-226; O-rings w/locking-tabs)

Popis

General description

Device Configuration: Cartridge

Preparation Note

Sterilization Method
10 autoclave cycles or SIP @ 126 °C for 30 min

Analysis Note

Gravimetric Extractables: after 24-h soak in water

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥3 L

Other Notes

Directions for Use

• Organism Retention: 99.99% retention
• Mode of Action: Filtration (nominal)
• Application: BioProcessing
• Intended Use: Bioburden reduction
• Instructions for Use: Please refer to the POLYGARD^® and CLARIGARD^® Cartridges user guide
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Legal Information

CLARIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany

POLYGARD is a registered trademark of Merck KGaA, Darmstadt, Germany