Saltar al contenido
Merck

Occurrence and risk assessment of selected phthalates in drinking water from waterworks in China.

Environmental science and pollution research international (2015-03-11)
Xiaowei Liu, Jianghong Shi, Ting Bo, Huiyuan Li, John C Crittenden
RESUMEN

The first nationwide survey of six phthalates (diethyl phthalate (DEP); dimethyl phthalate (DMP); di-n-butyl phthalate (DBP); butyl benzyl phthalate (BBP); bis(2-ethylhexyl) phthalate (DEHP); din-octyl phthalate (DnOP)) in drinking waters from waterworks was conducted across seven geographical zones in China. Of the six target phthalates, DBP and DEHP were the highest abundant phthalates with median (± interquartile range) values of 0.18 ± 0.47 and 0.18 ± 0.97 μg/L, respectively, but did not exceed the limit values in China's Standards for Drinking Water Quality. These phthalates in drinking water were generally higher in the northern regions of China than those in the southern and eastern regions. Based on the investigated concentrations, lifetime exposure risk assessment indicated that phthalates in drinking water did not pose carcinogenic and noncarcinogenic risks to Chinese residents, even under the conservative scenario (with 95th percentile risk). In addition, we found that DEHP contributed the greatest risk to the total exposure risk of all the selected phthalates and oral ingestion was the main exposure route for phthalates in drinking water.

MATERIALES
Referencia del producto
Marca
Descripción del producto

Sigma-Aldrich
Dietilpirocarbonato, 96% (NT)
Sigma-Aldrich
Dibutyl phthalate, 99%
Sigma-Aldrich
Dess-Martin periodinane, 97%
Sigma-Aldrich
Metanol, anhydrous, 99.8%
Sigma-Aldrich
Metanol, JIS special grade, ≥99.8%
Sigma-Aldrich
Fosfato de sodio dibasic dodecahydrate, BioXtra, ≥99.0% (T)
Sigma-Aldrich
Hexano, anhydrous, 95%
Sigma-Aldrich
Dietilpirocarbonato, 96% (NT)
Sigma-Aldrich
Dietiléter, SAJ first grade, ≥99.0%
Sigma-Aldrich
Dietiléter, contains 1 ppm BHT as inhibitor, anhydrous, ≥99.7%
Sigma-Aldrich
Dietilpirocarbonato, 96% (NT)
Sigma-Aldrich
Metanol, SAJ first grade, ≥99.5%
Sigma-Aldrich
Bis(2-ethylhexyl)phthalate-3,4,5,6-d4, 98 atom % D
Sigma-Aldrich
Hexano, JIS special grade, ≥96.0%
Sigma-Aldrich
Metanol, SAJ special grade
Sigma-Aldrich
Metanol, suitable for HPLC
Sigma-Aldrich
Dietiléter, JIS special grade, ≥99.5%
Sigma-Aldrich
Hexano, SAJ first grade, ≥95.0%
Sigma-Aldrich
Fosfato de sodio dibasic dodecahydrate, JIS special grade, ≥99.0%
Sigma-Aldrich
Metanol, suitable for HPLC, gradient grade, 99.93%
Sigma-Aldrich
Metanol, NMR reference standard
Sigma-Aldrich
Hexano, suitable for HPLC
Sigma-Aldrich
DBP, 98% (HPLC)
Sigma-Aldrich
Hexano, HPLC Plus, for HPLC, GC, and residue analysis, ≥95%
Sigma-Aldrich
Methanol solution, NMR reference standard, 4% in methanol-d4 (99.8 atom % D), NMR tube size 3 mm × 8 in.
Sigma-Aldrich
Hexano, JIS 300, ≥96.0%, for residue analysis
Sigma-Aldrich
Hexano, JIS 1000, ≥96.0%, for residue analysis
Sigma-Aldrich
Hexano, for residue analysis, JIS 5000
Sigma-Aldrich
Methanol-12C, 99.95 atom % 12C
Supelco
Methanol solution, contains 0.10 % (v/v) formic acid, UHPLC, suitable for mass spectrometry (MS), ≥99.5%