Saltar al contenido
Merck
Todas las fotos(1)

Documentos clave

8.07489

Sigma-Aldrich

Poli(etilenglicol)

1500, for synthesis

Sinónimos:

PEG

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización


About This Item

Fórmula lineal:
H(OCH2CH2)nOH
Número de CAS:
Número MDL:
Código UNSPSC:
13111021
Número índice de la CE:
500-038-2
NACRES:
NA.22

presión de vapor

<0.01 hPa ( 20 °C)

Nivel de calidad

Formulario

solid

temp. de autoignición

420 °C

potencia

28000 mg/kg LD50, oral (Rat)
>20000 mg/kg LD50, skin (Rabbit)

pH

4-7 (20 °C, 100 g/L in H2O)

mp

43-49 °C

temperatura de transición

flash point 260 °C

solubilidad

650 g/L

densidad

1.2 g/cm3 at 20 °C

densidad aparente

400‑500 kg/m3

temp. de almacenamiento

2-30°C

cadena SMILES

C(CO)O

InChI

1S/C2H6O2/c3-1-2-4/h3-4H,1-2H2

Clave InChI

LYCAIKOWRPUZTN-UHFFFAOYSA-N

¿Está buscando productos similares? Visita Guía de comparación de productos

Aplicación

Polyethylene glycol 1500 can be used as:
  • A plasticizer in the synthesis of polylactic acid/talc composites to improve the crystallinity and mechanical properties of the material.
  • A non-ionic surfactant in the preparation of organoclays.
  • A reactant in the synthesis of quasi-prepolymers by reacting with a polymeric 4,4′-diphenylmethano diisocyanate (pMDI) via the pre-polymerization method.

PEG-1500 can also be used in the aqueous two-phase extraction system along with inorganic salts (sulfates, carbonates, and ammonium phosphates) for the separation and extraction of both organic (amino acids and vitamins) and inorganic substances (metal salts).

Nota de análisis

Melting range (lower value): ≥ 43 °C
Melting range (upper value): ≤ 49 °C
Hydroxyl value: 70 - 80
Average molecular mass: 1400 - 1600
Identity (IR): passes test

Código de clase de almacenamiento

11 - Combustible Solids

Clase de riesgo para el agua (WGK)

WGK 1

Punto de inflamabilidad (°F)

Not applicable

Punto de inflamabilidad (°C)

Not applicable


Certificados de análisis (COA)

Busque Certificados de análisis (COA) introduciendo el número de lote del producto. Los números de lote se encuentran en la etiqueta del producto después de las palabras «Lot» o «Batch»

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Effect of polyethylene glycol on mechanical, thermal, and morphological properties of talc reinforced polylactic acid composites
Saravana Savitha, et al.
Materials Today: Proceedings, 5(1) (2018)
Extraction of monocarboxylic acids from diluted solutions with polyethylene glycol
Zinov?eva IV, et al.
Theoretical Foundations of Chemical Engineering, 53(5) (2019)
Recovery of rare-earth elements from nitrate solutions using polyethylene glycol 1500
Fedorova MI, et al.
Russian Chemical Bulletin, 69(7) (2020)
Synthesis of organoclays using non-ionic surfactants: Effect of time, temperature and concentration
Zampori L, et al.
Applied Clay Science, 48(1-2) (2010)
Analysis and Characterization of Quasi-Prepolymers Obtained from Polyethylene Glycol 1500 and 4, 4-Diphenylmethane-DiIsocyanate
Vazquez NAR, et al.
Material Science and Engineering with Advanced Research, 1(2) (2015)

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico