Saltar al contenido
Merck

427772

Sigma-Aldrich

Polyethylene

average Mw ~4,000 by GPC, average Mn ~1,700 by GPC

Sinónimos:

PE

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización


About This Item

Fórmula lineal:
H(CH2CH2)nH
Número de CAS:
Número MDL:
Código UNSPSC:
12162002
ID de la sustancia en PubChem:
NACRES:
NA.23

Formulario

powder

Nivel de calidad

mol peso

average Mn ~1,700 by GPC
average Mw ~4,000 by GPC

viscosidad

1.5 poise(25 °C, Brookfield Thermosel)(lit.)

mp

92 °C

número de ácido

<0.05 mg KOH/g

temperatura de transición

softening point 106 °C (ring and ball)

densidad

0.92 g/mL at 25 °C

cadena SMILES

C=C

InChI

1S/C2H4/c1-2/h1-2H2

Clave InChI

VGGSQFUCUMXWEO-UHFFFAOYSA-N

¿Está buscando productos similares? Visita Guía de comparación de productos

Aplicación

Mold release additive, lubricant in rubber processing, extrusion and calendering aid for PVC and dispersing aid for color concentrates.PEG-4000 may be used as a precipitant during protein fractionation and virus precipitation.Influence of PEG of various molecular weights on mammalian cell hybridization.

Características y beneficios

Low molecular weight and viscosity for easy processing.

Código de clase de almacenamiento

11 - Combustible Solids

Clase de riesgo para el agua (WGK)

WGK 3

Punto de inflamabilidad (°F)

Not applicable

Punto de inflamabilidad (°C)

Not applicable

Equipo de protección personal

Eyeshields, Gloves, type N95 (US)


Elija entre una de las versiones más recientes:

Certificados de análisis (COA)

Lot/Batch Number

¿No ve la versión correcta?

Si necesita una versión concreta, puede buscar un certificado específico por el número de lote.

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Los clientes también vieron

A method for the estimation of polyethylene glycol in plasma protein fractions, Analytical Biochemistry
Sims GEC and Snape TJ
Analytical Biochemistry, 107(1), 60-63 (1980)
Reduced cortical neurotransmitPolyethylene glycol-induced mammalian cell hybridization: Effect of polyethylene glycol molecular weight and concentration.
Davidson RL, et al.
Somatic Cell Genetics, 2(3), 271-280 (1976)
S Strieth
HNO, 61(3), 211-216 (2013-03-08)
Although porous polyethylene (PPE) implants are already used in reconstructive craniofacial surgery, they are still only applied in rhinoplasty when critically indicated. Biocompatibility of PPE implants (pore size ~100-200 µm) can be modified by tissue engineering: coatings with extracellular matrix
Kelly M Seymour et al.
Journal of biomechanical engineering, 135(2), 021017-021017 (2013-03-01)
Ultra high molecular weight polyethylene (UHMWPE, or ultra high), a frequently used material in orthopedic joint replacements, is often the cause of joint failure due to wear, fatigue, or fracture. These mechanical failures have been related to ultra high's strength
Nina Bloecher et al.
Biofouling, 29(3), 237-246 (2013-02-27)
The hydroid Ectopleura larynx is one of the main fouling organisms on salmon aquaculture cages in Norway; this study investigated novel surface materials and microtopographies to deter its settlement. The settlement preferences of hydroid larvae for 12 materials with wettabilities

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico