SSI TC-20 Tubing Cutter, product 58539-U, has a cutting arm that provides a square only (flat) cut of 1/16, 1/8 and 1/4 inch (1.6, 3.2 and 6.4 mm (maximum)) OD stainless steel tubing with ID down to 0.008 inches (0.2 mm).
58539-U
Cortador de tubos SSI™ TC-20
AC/DC input 110 V / 220 V AC, 50-60 Hz (voltage selectable), CE compliant
Sinónimos:
Tubing Cutter Tool
Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
About This Item
Código UNSPSC:
41115700
NACRES:
SB.52
En este momento no podemos mostrarle ni los precios ni la disponibilidad
Productos recomendados
Características
CE compliant
Descripción general
The SSI Model TC-20 electric stainless steel tube cutter assures a zero dead volume connection. Because the tubing is held securely in a clamp vise on the vertical swing arm, a square cut is produced when the swing arm is lowered against the abrasive cutting wheel, which produces a finished end. No lubricant or cutting fluid is required. The unit, which is CE marked, will cut most common tubing used in chromatography. Tubing with 1/16 in., 1/8 in., and 1/4 in. outside diameter, can be smooth-cut and dressed without distortion.
The precision ground dressing tool for the 1/16 in. O.D. tubing is included and is attached directly to the swing arm: it cannot be misplaced or lost. A dressing tool (deburring tool - Cat. No. 58804) for 1/8 in. diameter can be ordered separately.
The precision ground dressing tool for the 1/16 in. O.D. tubing is included and is attached directly to the swing arm: it cannot be misplaced or lost. A dressing tool (deburring tool - Cat. No. 58804) for 1/8 in. diameter can be ordered separately.
Información legal
SSI is a trademark of Scientific Systems, Inc.
Opcional
Referencia del producto
Descripción
Precios
pieza de repuesto
Referencia del producto
Descripción
Precios
Elija entre una de las versiones más recientes:
Certificados de análisis (COA)
Lot/Batch Number
It looks like we've run into a problem, but you can still download Certificates of Analysis from our Documentos section.
Si necesita más asistencia, póngase en contacto con Atención al cliente
¿Ya tiene este producto?
Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.
Los clientes también vieron
-
What is the maximum OD of SS Pipe that this can cut? We need to cut 3/8" OD .035 wall 316 SS Pipe at both flat & a 45 degree. Can this machine cut at a 45 degree angle?
1 answer-
Helpful?
-
Active Filters
Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.
Póngase en contacto con el Servicio técnico
