D003F3P01

Cartucho de filtración Clarigard^®

nominal pore size 0.3 μm, cartridge nominal length × diam. 30 in. (747.5-752.5 mm) × 2.75 in. (70 mm)

• UNSPSC Code: 23151806

Propiedades

• material: polypropylene filter
• Quality Level: 400
• feature: hydrophilic
• manufacturer/tradename: Clarigard^®
• parameter: 4.8 bar max. differential pressure (70 psid) at 20 °C
• cartridge nominal length × diam.: 30 in. (747.5-752.5 mm) × 2.75 in. (70 mm)
• impurities: ≤0.25 EU/mL bacterial endotoxins (LAL test, aqueous extraction)
• gravimetric extractables: ≤10 mg
• pore size: 0.3 μm nominal pore size; 0.3 μm pore size
• input: sample type liquid
• cartridge code: Code F (Double Open End Flat Gasket)

Descripción

General description

Clarigard^® filters 99.99% retention characteristic makes them ideal for the protection of critical downstream process steps such as membrane filters or chromatography columns. The graded-density depth structure of Clarigard^® filter media provides maximum filtration capacity, and the polypropylene construction offers low extractable levels and broad chemical compatibility.

Preparation Note

Sterilization: May be autoclaved for 10 cycles of 30 minutes at 126 °C or steam sterilized for 10 cycles of 30 minutes at 126 °C or hot water sanitized at 80 °C maximum for 30 minutes.

Analysis Note

Gravimetric Extractables: After autoclaving and a 24-hour soak in ASTM^® Type 1 reagent grade water at controlled room temperature, meets the USP Oxidizable Substances Test requirements of <10 mg.

Other Notes

Directions for Use:

• Organism Retention: 99.99% retention
• Mode of Action: Filtration (nominal)
• Application: BioProcessing
• Intended Use: Bioborden reduction
• Instructions for Use: Please refer to the Polygard^® and Clarigard^® Cartidges user guide
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Legal Information

ASTM is a registered trademark of American Society for Testing and Materials

CLARIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany

POLYGARD is a registered trademark of Merck KGaA, Darmstadt, Germany