Saltar al contenido
Merck
Todas las fotos(1)

Documentos clave

Z279749

Sigma-Aldrich

Suba-Seal® silicone rubber septa

fits neck I.D., 14.0 mm, joint: ST/NS 14/20

Sinónimos:

Silicone Rubber Septa

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
Todas las fotos(1)

About This Item

Código UNSPSC:
41121800
eCl@ss:
32119211
NACRES:
NB.35
En este momento no podemos mostrarle ni los precios ni la disponibilidad

Materiales

rubber septa (silicone)
translucent septa

Junta

joint: ST/NS14/20

Características

fits neck I.D. 14.0 mm

fabricante / nombre comercial

Suba-Seal®

¿Está buscando productos similares? Visita Guía de comparación de productos

Categorías relacionadas

Descripción general

Suba-Seal® silicone rubber septa with turnover flange grips outside of the container neck promote a double seal in conjunction with annular serrations on the hollow plug. The annular serrations of the septa depress themselves against the inside wall of the bottleneck, making each serration a suction sealing point.

Características y beneficios

  • Translucent silicone rubber septa
  • Contains no pigments, waxes, or molding agents
  • Good for high heat applications (200°C continuous or 400°C intermittent)
  • Autoclavable for sterile uses
  • Excellent resistance to deterioration due to sunlight and ozone

Información legal

Suba-Seal is a registered trademark of Merck KGaA, Darmstadt, Germany

Elija entre una de las versiones más recientes:

Certificados de análisis (COA)

Lot/Batch Number

It looks like we've run into a problem, but you can still download Certificates of Analysis from our Documentos section.

Si necesita más asistencia, póngase en contacto con Atención al cliente

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Questions

1–3 of 3 Questions  

  1. can this septa be used with aggressive chemicals like Thionyl Chloride - some of this reagent may get into contact with the septa, would it degrade as a result of a brief contact at room temperature?

    1 answer

    1. There have not been any specific tests regarding the use of this silicone rubber septa with thionyl chloride. There is general information regarding chemical compatibility from online resistance guides for thionyl chloride that indicates this compound is recommended for use with "fluoroelastomers." Please see this chemical compatibility information at the link below.

      https://www.minorrubber.com/compatibility-chart.html

      Offerings for fluoroelastomer septa can be viewed through the link below for standard catalog options.

      https://www.sigmaaldrich.com/products/labware/septa?country=US&language=en&cmsRoute=products&cmsRoute=labware&cmsRoute=septa&page=1&term=fkm

      Helpful?

  2. Can the Suba-Seal silicone rubber septa be sterilized with gamma irradiation?

    1 answer

    1. Our silicone suba seals are generally steam sterilized. Testing has not been done here at Sigma-Aldrich using gamma irradiation. Gamma rays are known to change some physical properties of silicone rubber. Refer to the attached white paper from a leading manufacturer of silicone rubber products. Based on this, it seems gamma irradiation is detrimental to silicone rubber.

      Helpful?

  3. What is the Department of Transportation shipping information for this product?

    1 answer

    1. Transportation information can be found in Section 14 of the product's (M)SDS.To access the shipping information for this material, use the link on the product detail page for the product.

      Helpful?

Reviews

No rating value

Active Filters

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico