Saltar al contenido
Merck
Todas las fotos(2)

Key Documents

View All Documentation

547999

Sigma-Aldrich

Polyethylene

High density, melt index 2.2 g/10 min (190 °C/2.16kg)

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
Todas las fotos(2)

About This Item

Fórmula lineal:
H(CH2CH2)nH
Número de CAS:
9002-88-4
MDL number:
MFCD00084423
UNSPSC Code:
12162002
PubChem Substance ID:
24879001
NACRES:
NA.25

form

pellets

melt index

2.2 g/10 min (190 °C/2.16kg)

hardness

65 (Shore D, ASTM D 2240)

transition temp

softening point 123 °C (Vicat, ASTM D 1525)

density

(high density)

InChI

1S/C2H4/c1-2/h1-2H2

InChI key

VGGSQFUCUMXWEO-UHFFFAOYSA-N

¿Está buscando productos similares? Visita Guía de comparación de productos

Application

Typical applications included specialty injection molded parts.

Features and Benefits

Excellent low temperature impact strength and environmental stress-crack resistance.

Storage Class

11 - Combustible Solids

wgk_germany

WGK 3

flash_point_f

Not applicable

flash_point_c

Not applicable

ppe

Eyeshields, Gloves, type N95 (US)

Certificados de análisis (COA)

Busque Certificados de análisis (COA) introduciendo el número de lote del producto. Los números de lote se encuentran en la etiqueta del producto después de las palabras «Lot» o «Batch»

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Los clientes también vieron

Slide 1 of 4

1 of 4

Polyethylene - High Density (HDPE), granule, 3 mm nominal granule size, weight 100 g, natural

GF53760865

Polyethylene - High Density

Polyethylene - High Density (HDPE), film, thickness 0.01 mm, size 100 × 100 mm

GF65138182

Polyethylene - High Density

Polyethylene analytical standard, for GPC, 2,000

Supelco

81223

Polyethylene

Polyethylene - High Density (HDPE), granule, 5 mm nominal granule size, weight 2 kg

GF77863517

Polyethylene - High Density

Nina Bloecher et al.
Biofouling, 29(3), 237-246 (2013-02-27)
The hydroid Ectopleura larynx is one of the main fouling organisms on salmon aquaculture cages in Norway; this study investigated novel surface materials and microtopographies to deter its settlement. The settlement preferences of hydroid larvae for 12 materials with wettabilities
Thibault Honegger et al.
Lab on a chip, 13(8), 1538-1545 (2013-02-23)
In this paper, we introduce a dielectrophoresis (DEP)-based handling method that allows fine 3D manipulation of beads in suspension using a lab on a chip device. The device consists of two layers of linear electrodes on the top and bottom
Eliandra Mirlei Rossi et al.
Journal of infection in developing countries, 7(3), 229-234 (2013-03-16)
Contaminated sponges might lead to cross-contamination in kitchens since they can transfer microorganisms to surfaces where microorganisms can survive for hours or days and contaminate food. The main objective of this study was to evaluate the transfer and the survival
Maria C S Inacio et al.
Acta orthopaedica, 84(2), 145-152 (2013-03-15)
There is no substantial clinical evidence for the superiority of alternative bearings in total knee arthroplasty (TKA). We compared the short-term revision risk in alternative surface bearing knees (oxidized zirconium (OZ) femoral implants or highly crosslinked polyethylene (HXLPE) inserts) with
Morteza Meftah et al.
The Journal of bone and joint surgery. American volume, 95(13), 1193-1197 (2013-07-05)
Ceramic femoral heads produce less wear of the opposing polyethylene than do metal femoral heads in wear simulation studies. This is a matched-pair analysis of the wear of ceramic and metal femoral heads on conventional polyethylene in uncemented total hip
Ver todos los artículos relacionados

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico