![Poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene] average Mn 40,000-70,000](/deepweb/assets/sigmaaldrich/product/structures/344/488/b8f8179d-3970-4deb-a754-adda88cdb36f/640/b8f8179d-3970-4deb-a754-adda88cdb36f.png)
Product 768618, Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate (Orgacon DRY) is not a formulation or dispersion. It consists of dry PEDOT:PSS powder/pellets (lyophilized). Because PSS (poly(styrenesulfonate) is hygroscopic, the pellets will always contain some residual water. These pellets can be redispersed in organic solvents. Orgacon DRY is not soluble in chloroform or chlorobenzene.
768618
Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate)
dry re-dispersible pellets
Synonyme(s) :
Orgacon™ DRY, PEDOT:PSS, Poly(2,3-dihydrothieno-1,4-dioxin)-poly(styrenesulfonate)
Se connecterpour consulter vos tarifs contractuels et ceux de votre entreprise/organisme
About This Item
Le tarif et la disponibilité ne sont pas disponibles actuellement.
Produits recommandés
Vous recherchez des produits similaires ? Visite Guide de comparaison des produits
Description générale
A conducting polymer such as poly(3,4-ethylenedioxythiophene) doped with poly(styrene sulfonate) anions (PEDOT/PSS) is widely used in various organic optoelectronic devices.[1][2][3] PEDOT: PSS is a blend of cationic polythiopene derivative, doped with a polyanion. High electrical conductivity and good oxidation resistance of such polymers make it suitable for electromagnetic shielding and noise suppression. Thus, the polymer film was found to possess high transparency throughout the visible light spectrum and even into near IR and near UV regions, virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Impact of small electric and magnetic fields on the polymer was studied. [4]
Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) is a conductive polymer (CP) that is formed by electropolymerizing 3,4-ethylenedioxythiophene in a solution of poly(styrenesulfonate) (PSS). PEDOT is doped with positive ions and PSS with negative ions. It is a low cost CP that is produced with physical appearance (for example dispersible pellets). The following are the properties that make PEDOT:PSS a viable polymer in organic electronics[5][6]:
- good optical properties
- high conductivity
- functionalization of nanomaterials
- high thermal stability
- easy processing
Application
Orgacon DRY is specifically useful for water sensitive formulations containing UV curable monomer (suitable with small amount of water) and pre-polymer based formulations.
Orgacon DRY pellets can be re-dispersed in organic solvents such as ethanol. The resulting dispersion can be used in coating - or ink - formulations targeted for different applications.
Allow retention of PEDOT/PSS key properties in polar organic solvents; such as Ethanol; Surface Resistance: 200~450 Ohm/square; Visual Light Transmission: ~85%
Orgacon DRY pellets can be re-dispersed in organic solvents such as ethanol. The resulting dispersion can be used in coating - or ink - formulations targeted for different applications.
Allow retention of PEDOT/PSS key properties in polar organic solvents; such as Ethanol; Surface Resistance: 200~450 Ohm/square; Visual Light Transmission: ~85%
PEDOT:PSS can be used as a conductive material with a high mobility for charge carriers. It can be used for a wide range of energy based applications such as organic printable electronics, textile electronics, electrochemical storage and supercapacitors, and lithium ion batteries.[7][8][9][10]
Virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Conductive polymer blend.
Propriétés physiques
- Active chemical PEDOT/PSS
- Visual appearance blue-grey pellets
- Water content max. 15 % under 50% RH; 22°C
- Shelf life 24 month in storage conditions
Notes préparatoires
When spin-coated using S300 EtOH (contains less than 3.5% wt. H20) as the solvent; the Visual Light Transmission (VLT) according to ASTM D 1003 (excludes substrate) is 85%; and the Surface Resistance is 450 Ohm/square.
Informations légales
Product of Agfa-Gevaert N.V.
Orgacon is a trademark of Agfa-Gevaert N.V.
Mention d'avertissement
Danger
Mentions de danger
Conseils de prudence
Classification des risques
Eye Dam. 1
Code de la classe de stockage
11 - Combustible Solids
Classe de danger pour l'eau (WGK)
WGK 3
Point d'éclair (°F)
Not applicable
Point d'éclair (°C)
Not applicable
Faites votre choix parmi les versions les plus récentes :
Déjà en possession de ce produit ?
Retrouvez la documentation relative aux produits que vous avez récemment achetés dans la Bibliothèque de documents.
Les clients ont également consulté
Foldable Textile Electronic Devices Using All-Organic Conductive Fibers.
Miura H, et al.
Advanced Engineering Materials, 16(5), 550-555 (2014)
Wet-spinning of PEDOT: PSS/functionalized-SWNTs composite: a facile route toward production of strong and highly conducting multifunctional fibers.
Jalili R, et al.
Scientific reports, 3(18), 3438-3438 (2013)
Synthesis and optimization of PEDOT: PSS based ink for printing nanoarrays using Dip-Pen Nanolithography.
Wagner M, et al.
Synthetic Metals, 181(18), 64-71 (2013)
Three dimensional cellular architecture of sulfur doped graphene: self-standing electrode for flexible supercapacitors, lithium ion and sodium ion batteries.
Islam MM, et al.
Journal of Material Chemistry A, 5(11), 5290-5302 (2017)
Exploiting high quality PEDOT: PSS-SWNT composite formulations for wet-spinning multifunctional fibers.
Jalili R, et al.
Journal of Materials Chemistry, 22(48), 25174-25182 (2012)
Articles
A detailed article on conducting polymer materials for flexible organic photovoltaics (OPVs) applications.
Advancements in bioelectronics, incorporating self-healing materials for wearable devices, and measuring bioelectric signals to assess physiological parameters.
Advancements in bioelectronics, incorporating self-healing materials for wearable devices, and measuring bioelectric signals to assess physiological parameters.
Advancements in bioelectronics, incorporating self-healing materials for wearable devices, and measuring bioelectric signals to assess physiological parameters.
-
For product 768618, Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate), what is additional product information including solubility?
1 answer-
Helpful?
-
-
What can you tell me regarding the method of preparation of the PEDOT/PSS products, such as Products 768618 and 739316?
1 answer-
The information on the molecular weights of the PEDOT and PSS used to make each batch is held as proprietary.The exact information on the relative amounts (by weight) of the PEDOT and PSS present in these polymers is also held as proprietary. There is a little more PSS than PEDOT; this is logical, since the formula weight for the monomeric equivalent in PSS (C7H6SO3) is a little higher than the formula weight for the monomeric equivalent in PEDOT (C6H4SO2).The solution, product 739316 is made in situ; it is not made from the dry pellets (product 768618).
Helpful?
-
-
What is the Department of Transportation shipping information for this product?
1 answer-
Transportation information can be found in Section 14 of the product's (M)SDS.To access the shipping information for this material, use the link on the product detail page for the product.
Helpful?
-
Active Filters
Notre équipe de scientifiques dispose d'une expérience dans tous les secteurs de la recherche, notamment en sciences de la vie, science des matériaux, synthèse chimique, chromatographie, analyse et dans de nombreux autres domaines..
Contacter notre Service technique
