Saltar al contenido
Merck
  • Fast determination of 22 sulfonamides from chicken breast muscle using core-shell nanoring amino-functionalized superparamagnetic molecularly imprinted polymer followed by liquid chromatography-tandem mass spectrometry.

Fast determination of 22 sulfonamides from chicken breast muscle using core-shell nanoring amino-functionalized superparamagnetic molecularly imprinted polymer followed by liquid chromatography-tandem mass spectrometry.

Journal of chromatography. A (2014-05-02)
Yong-Gang Zhao, Li-Xin Zhou, Sheng-Dong Pan, Ping-Ping Zhan, Xiao-Hong Chen, Mi-Cong Jin
RESUMEN

A novel, simple and sensitive method was developed for the simultaneous determination of 22 sulfonamides (SAs) in chicken breast muscle by using the dispersive micro-solid-phase extraction (d-μ-SPE) procedure combined with ultra-fast liquid chromatography-tandem quadrupole mass spectrometry (UFLC-MS/MS). The excellent core-shell nanoring amino-functionalized superparamagnetic molecularly imprinted polymer (CS-NR-Mag-MIP) was used as sorbent, and the main factors affecting the extraction efficiency were investigated in detail. All target compounds showed good linearities in the tested range with correlation coefficients (r) higher than 0.9980. The mean recoveries were in the range of 85.0-112.2% at low, medium and high concentration levels (0.1, 1.0 and 5.0 ng/g). The intra-day and inter-day relative standard deviations (RSDs) were lower than 6.0% and 8.9%, respectively. The limits of quantification for the 22 SAs were between 0.013 and 0.099 ng/g. The developed d-μ-SPE-UFLC-MS/MS method had been successfully applied to the chicken breast muscle samples for food-safety risk monitoring in Zhejiang Province, China. The results showed sulfamethazine, sulfamethoxazole and sulfaquinoxaline in five out of three hundred collected samples were detected with concentrations of 0.418-2.28, 16.4 and 2.93 ng/g, respectively. It was confirmed that the CS-NR-Mag-MIP was a kind of highly effective d-μ-SPE materials used for the SAs analyses.

MATERIALES
Referencia del producto
Marca
Descripción del producto

Sigma-Aldrich
Acetonitrilo, suitable for HPLC, gradient grade, ≥99.9%
Sigma-Aldrich
Acetonitrilo, HPLC Plus, ≥99.9%
Sigma-Aldrich
Ácido fórmico, reagent grade, ≥95%
Sigma-Aldrich
Ácido fórmico, ACS reagent, ≥96%
Sigma-Aldrich
Ammonium acetate, ACS reagent, ≥97%
Sigma-Aldrich
Ácido fórmico, puriss. p.a., ACS reagent, reag. Ph. Eur., ≥98%
Sigma-Aldrich
Acetonitrilo, ACS reagent, ≥99.5%
Sigma-Aldrich
Acetonitrilo, for HPLC, for UV, ≥99.9% (GC)
Sigma-Aldrich
Ammonium acetate, ≥99.99% trace metals basis
Sigma-Aldrich
Acetonitrilo, suitable for HPLC, gradient grade, ≥99.9%
Sigma-Aldrich
Acetonitrilo, anhydrous, 99.8%
Sigma-Aldrich
Ácido oleico, technical grade, 90%
Sigma-Aldrich
Metilmetacrilato, contains ≤30 ppm MEHQ as inhibitor, 99%
Sigma-Aldrich
Ácido fórmico, puriss., meets analytical specifications of DAC, FCC, 98.0-100%
Sigma-Aldrich
Divinylbenzene, technical grade, 80%
Sigma-Aldrich
Ácido fórmico, ACS reagent, ≥88%
Sigma-Aldrich
Tetraethylenepentamine, technical grade
Sigma-Aldrich
Ammonium acetate, for molecular biology, ≥98%
Sigma-Aldrich
Ácido oleico, BioReagent, suitable for cell culture
Sigma-Aldrich
Glycidyl methacrylate, ≥97.0% (GC)
Sigma-Aldrich
Luperox® A75, Benzoyl peroxide, 75%, remainder water
Sigma-Aldrich
Acetonitrilo, suitable for HPLC-GC, ≥99.8% (GC)
Sigma-Aldrich
Ammonium acetate solution, for molecular biology, 7.5 M
Supelco
Ammonium acetate, LiChropur, eluent additive for LC-MS
Sigma-Aldrich
Cloruro de hierro (III), sublimed grade, ≥99.9% trace metals basis
Sigma-Aldrich
Cloruro de hierro (III), anhydrous, powder, ≥99.99% trace metals basis
Sigma-Aldrich
Acetonitrilo, biotech. grade, ≥99.93%
Sigma-Aldrich
Glycidyl methacrylate, 97%, contains 100 ppm monomethyl ether hydroquinone as inhibitor
Sigma-Aldrich
Ácido oleico, natural, FCC
Sigma-Aldrich
Ácido oleico, meets analytical specification of Ph, Eur., 65.0-88.0% (GC)