Saltar al contenido
Merck

687316

Sigma-Aldrich

PEDOT

bis-PEG, lauryl terminated, 0.7 wt. % (nitromethane dispersion)

Sinónimos:

Aedotron C3-NM, C12-PEG-block-PEDOT-block-PEG-C12

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización


About This Item

Número de CAS:
Código UNSPSC:
12352103
NACRES:
NA.23

Nombre del producto

Poly(3,4-ethylenedioxythiophene), bis-poly(ethyleneglycol), lauryl terminated, 0.7 wt. % (dispersion in nitromethane)

Formulario

liquid (dispersion)

Nivel de calidad

contiene

perchlorate as dopant

composición

Acetonitrile, 4-8 wt. %
Aedotron- C3 polymer, 0.2-0.7 wt. %
Nitromethane, 90-95 wt. %
proprietary processing additive, 0.1-0.7 wt. %
Propylene glycol, 0.0-0.3 wt. %

concentración

0.5-0.9 wt. % (content of dispersion)
0.7 wt. % (dispersion in nitromethane)

resistividad de superficie

600-3000 Ω/sq

transmitancia

70-85%

tamaño de partícula

200-600 nm

conductividad

10-60 S/cm

¿Está buscando productos similares? Visita Guía de comparación de productos

Descripción general

Aedotron polymers are solvent-dispersable forms of PEDOT. These are copolymers of doped PEDOT and a flexible, soluble polymer such as poly(ethylene glycol) (PEG). These colloidal dispersions are stabilized by the highly solvated PEG chains which sterically limit the aggregation of the PEDOT blocks. Aedotron polymers are neither acidic nor corrosive, it easily disperses in polar aprotic solvents. Aedotron C3-NM is a triblock copolymer.
Please follow this link for Aedotron/Oligotron selection guide table.

Aplicación

Conducting polymer dispersion suitable for making conducting films, anti-static layers and transparent electrodes for electroluminescent lamps.
Nitromethane dispersions can be used to cast thin films on glass, ITO, silicon wafers and many polymeric substrates. Compatibility of the polymeric substrate with nitromethane should be tested in each case. Coat the substrate with a "pool" of the nitromethane dispersion. Thin transparent films are typically spun at 1000 RPM or higher speeds, but more conducting films can be obtained at lower speeds. A single layer spun at 1000 RPM is typically 75 nm thick.

Características y beneficios

The copolymer structure renders the conducting polymer PEDOT highly dispersible in organic solvents. Nitromethane has a suitable volatility for spin coating.

Precaución

Store this product at room temperature (do not refrigerate or freeze). Some settling will normally occur. Agitate, sonicate, and filter prior to use. A plug of glass wool in a pipette can be used for easy filtration. The shelf life of this product will vary depending on how it is stored and handled. Product should be discarded if heavy aggregation occurs, or if sonication / filtering are inadequate to produce a good casting solution.

Información legal

Aedotron is a trademark of TDA Research, Inc.

Palabra de señalización

Danger

Clasificaciones de peligro

Acute Tox. 4 Inhalation - Acute Tox. 4 Oral - Carc. 2 - Flam. Liq. 2 - Repr. 2

Código de clase de almacenamiento

3 - Flammable liquids

Clase de riesgo para el agua (WGK)

WGK 2

Punto de inflamabilidad (°F)

71.6 °F - closed cup

Punto de inflamabilidad (°C)

22 °C - closed cup


Elija entre una de las versiones más recientes:

Certificados de análisis (COA)

Lot/Batch Number

¿No ve la versión correcta?

Si necesita una versión concreta, puede buscar un certificado específico por el número de lote.

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Artículos

In the field of organic printable electronics, such as OLEDs and organic photovoltaics (OPVs), improved organic conducting and semiconducting materials are needed. The progress in two fields is reviewed in this article.

Conjugated polymers offer charge transport between inorganic, electrically conducting metals and organic, proton-conducting biological systems.

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico