Yes, this product is a successor of Antifoam Y-30 with a pH of approximately 3.
STS0100
Antifoam L-30 Emulsion
aqueous-silicone emulsion
Sinonimo/i:
Antifoam L-30 Emulsion
Autenticatiper visualizzare i prezzi riservati alla tua organizzazione & contrattuali
Scegli un formato
100 ML
CHF 52.30
250 ML
CHF 105.00
500 ML
CHF 180.00
Scegli un formato
Cambia visualizzazione
100 ML
CHF 52.30
250 ML
CHF 105.00
500 ML
CHF 180.00
About This Item
Codice UNSPSC:
12161901
NACRES:
NA.21
Prodotti consigliati
Livello qualitativo
contiene
emulsifier
Descrizione generale
Antifoam is also known as defoamer. It is a chemical additive that reduces and hinders the formation of foam in industrial process liquids. It is used to prevent formation of foam or is added to break foam that is already formed.
Confezionamento
100, 250, 500 mL in poly bottle
Altre note
A 30% aqueous emulsion
Codice della classe di stoccaggio
10 - Combustible liquids
Classe di pericolosità dell'acqua (WGK)
WGK 3
Scegli una delle versioni più recenti:
Certificati d'analisi (COA)
Lot/Batch Number
Non trovi la versione di tuo interesse?
Se hai bisogno di una versione specifica, puoi cercare il certificato tramite il numero di lotto.
Possiedi già questo prodotto?
I documenti relativi ai prodotti acquistati recentemente sono disponibili nell’Archivio dei documenti.
-
Is the pH of the 30% emulsion pH3?
1 answer-
Helpful?
-
-
I would like to ask you about 'Antifoam L-30 Emulsion' 1. Is it 'Nonionic surfactant'? 2 Is the product information avaiable for Antifoam L-30 Emulsion. If yes, Please send the link or file for Antifoam L-30 Emulsion.
1 answer-
This product contains proprietary nonionic emulsifiers. Currently, a product datasheet is not available.
Helpful?
-
-
What is the density of this product?
1 answer-
The density of this product is not determined.
Helpful?
-
-
Queston about Antifoam L-30 Emulsion; Does it contain non-ionic emulsifiers? If the product information sheet is available, I would like to get to assess the contents
1 answer-
Antifoam L-30 is a nonionic emulsifier
How To Use
Antifoam L-30 Emulsion works effectively in very low concentrations. One to 100 parts of active silicone per million parts foamer are sufficient to eliminate most foams. Begin trials at higher use levels (50 ppm active silicone), then work down to the level of foam control desired.
The following are parts per million equivalents:
To Yield 50 PPM Antifoam10.9 ounces mixed into 500 gallons
22.0 ounces mixed into 1,000 gallons
55.1 ounces mixed into 2,500 gallons
16.5 quarts mixed into 25,000 gallonsAdding the Antifoam
To produce optimal foam control, it is necessary to have the antifoam completely dispersed in the foaming medium. Follow these steps to achieve complete dispersion:
1. Agitate product prior to use.
2. Predilute with 3 to 10 parts of cool water to aid in dispersion. Add the antifoam to the water with slow mixing. Prediluted material should be used immediately.
If the system can provide adequate agitation to disperse the antifoam, the antifoam emulsion may be added directly without predilution being necessary.
3. Add the diluted antifoam prior to the point where foaming occurs within the system, if possible.This product will freeze at or below 0°C (32°F). If frozen, Antifoam L-30 Emulsion can be thawed and used without loss of efficiency. Agitation may be required. Avoid storage conditions above 49°C (120°F).
Helpful?
-
Active Filters
Il team dei nostri ricercatori vanta grande esperienza in tutte le aree della ricerca quali Life Science, scienza dei materiali, sintesi chimica, cromatografia, discipline analitiche, ecc..
Contatta l'Assistenza Tecnica.
